Pulsar Elite Series: Quartz Mini E-Nail Kit with 25mm Axial Coil

Pulsar Elite Series: Quartz Mini E-Nail Kit with 25mm Axial Coil

The Pulsar Elite Series 25mm Mini Hybrid Enail kit is the same pulsar elite series kit that is known and loved by many but now it includes a 25mm axial enail coil and a full weld 14mm Male 90 Degree Quartz Enail Banger!

The Pulsar controller box features a more compact design that is similar to the galaxy enail controller boxes, its temp ranges from 220-990 degrees giving the user a wide range of temperature options! The Elite Series Axial Mini Hybrid E-Nail can be used with the quartz and titanium nail that comes within the kit or any 25mm quartz banger!

This Pulsar 25mm Axial Enail Coil is compatible with any Bucket Banger that has a 25mm diameter bottom, Terp Slurper Bangers with a 25mm bottom dish, any Titanium nail, or Hybrid Nail that either utilize a 25mm Dish.

The Axial Enail Coils design resembles the shape of a bucket to cover the entire bottom surface of a banger and also the side walls as well. Axial coils are designed to fit perfectly to the bottom of your quartz banger and is held in place by an oclamp. Axial coils are meant to heat your enail banger to higher temperatures and for even heat distribution.

This E-Banger is also fully welded to increase durability and strength, unlike regular weld bangers that are connected by two separate pieces which are more prone to breaking. It also features a beveled top to create a flush seal when a carb cap is placed on top, this seal actually helps create more pressure allowing for lower temperature dabs and smoother rips.

The Vortex Bubble Cap included in this kit can direct your airflow with a simple to operate ball-and-socket mechanism, move and twist the cap using the extended handle to get the bottom vortex portion of the carb cap to spin your terp pearls around for the most directional airflow imaginable. The extended handle also contains a large airflow hole which can be capped by your finger or left open for more air to flow through, resulting in more intense rips.

This kit includes everything needed to elevate your dab experience except for the water pipe! The components of the kit are also cross-compatible with all other Pulsar Elite Series eNail products. Covered by a manufacturer's 1 year warranty on the control box and a 6 month warranty on the coil.

Specifications:

Elite Series Controller Box:

• Temperature Range: 0 F - 1200 F
• Controller Dimensions: 4.5" x 2.5" x 1.25"
• Display: Flat Digital - Set Value
• Coil Connection: 5 PIN Female XLR​
• Voltage Range: 90-150v
• Power: 150w

25mm Axial Enail Coil:

• Length: 4ft
• Coil Connection: 5 PIN Female XLR
• Coil Style: Axial
• Coil Size: 25mm
• Fireproof Kevlar Sheath
• Pin Set Up: PIN 1: AC, PIN 2: AC, PIN 3: TC+, PIN 4: TC-, PIN 5: Ground

NOTE: This coil is only made to be used with Pulsar or Galaxy Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair Pulsar Enail Coils with other brand controller boxes unless the pin set up is the same.​​

Quartz Enail Banger:

• Joint Size: 14mm
• Joint Gender: Male
• Joint Angle: 90 Degree
• Banger Bucket Diameter: 25mm Diameter
• Dish Wall Thickness: 2mm

Features:​

• Micro eNail Kit
• Temperature Control with Digital Readout
• Compatible with 25mm Nails and Bangers
• 1 Year Warranty on the Control Box
• 6 Month Warranty on the Enail Coil
• Push Button Operation
• Removable and Locking 5ft Power Cord

Includes:

• 1 x Elite Series Axial eNail Temperature Control Box
• 1 x 25mm Axial Enail Coil
• 1 x 5 Foot Power Cord
• 1 x Quartz Bucket Enail Banger: 14mm Male 90 Degree
• 1 x Bubble Vortex Carb Cap

Desktop E-nails are by far the most powerful, efficient, customizable and controlled dabbing experience. Whether you enjoy hot dabs, low temp dabs, or something in the middle, you can find the exact temp you are looking for with a desktop e-nail. No matter what type of pipe you have, 45 degree angle, 90 degree angle, 14mm male, 10mm, female 19mm male and the list goes on, there is a desktop e-nail that will fit your pipe!

Desktop plug-in E-nails allow for efficiently consuming your concentrates without burn or waste. Need to have a long sesh with friends, get yourself an e-nail. Want to travel and not worry about butane? Grab yourself an e-nail. Rather not deal with the whole torch situation?

Desktop plug-in e-nails are the only type of e-nail that can rival the torch experience. Up your game and grab one today! As an alternative to an E-nail some people have been choosing temp readers to understand the banger's exact temperature.

Difference in Joint Sizes 10/14/18mm

There are a few specifications you can garner from a pipe's joint size…

• 10mm - Typically, when you are using a 10mm joint you will be working with a smaller pipe with less water filtration and airflow. These are predominately used for concentrates to enable smaller smoother inhales.
• 14mm -The 14mm joint sizes are the most common, they are typically found in a range of heights and percolator set ups, while offering more water filtration options than smaller 10mm pipes.
• 18mm-19mm - This joint size (18mm) is traditionally reserved for those with "lifeguard lungs", who can consume larger inhales, the pipes are typically much larger in size sometimes up to 6 ft. while offering the most water filtration.

To put it simply it’s the straw concept. Think of using any coffee straw verses using a large milkshake straw, soda straw. With one you can inhale a large amount the other would be more constricted. Some people would prefer the more constrained straw e.g. the "coffee straw" (10mm).

Compatible with :

• Pipes: Universal Joint and Joint Size Make this Enail kit compatible with all Water Pipes

Quick Tip

Why should I choose a Desktop E-nail?

Desktop e-nails are best for those looking for the ultimate rig experience. With specific temp control you are able to fine tune the heat settings to perfectly match your desired temperature. Just because you can take these devices upwards of 900 degrees doesn't mean you would want to nor is it advised. Many dabbers have a "sweet spot", referring to the temperature at which the flavor, potency and vapor quality are all completely in line with the user's preferences. Desktop Enails are the most efficient way to consume concentrates by allowing you the ability to find the perfect temperature for your specific concentrate.

Read More about the Top 5 ENails of 2021 by Clicking Here!​​

Why Should I Buy an Enail?

An Enail offers the most powerful, precise , effective and efficient dabbing experience possible! Click Here to Read More

What is the Best E-Nail?

There are many different types of enails, between analog, digital, portable, or choosing between the options like hybrid, quartz, titanium, ceramic, different sizes and different brands like High Five, Galaxy, or VapeBrat, the options may seem a little overwhelming. It is best to choose an Enail set up that is most suitable to your wants, needs, and preferences! Click Here to Read More

Which Dab Rig is Best for my E-nail?

Recycler rigs are typically the best for enails and concentrates in general, offering maxing filtration with minimum cooling. With an e-nail, sturdiness and balance is key, this is why we have specifically chosen a few options to offer you that will be perfect for the e-nail being viewed. Click Here to Read More

What difference does the coil size make?

The coil size determines the banger size which is based upon the typical dab size. Is using a Reclaim Catcher a good idea? Reclaim Catchers pay for themselves within the first few usages by keeping the pipe clean while saving some reclaim for later. Click Here to Read More

What temperature should I set my enail to?

The recommended temperature ranges between 450-650 depending upon your preferences. Click here to Read More

How to Dab with and Use an E-Nail?

• Plug in all of the parts, connect the nail/banger and rig
• The controller box can now be turned on, most enail controller boxes will have a switch or a button to turn it on and off. (If you see an error code on the display screen after the controller box is turned on and the COIL IS CONNECTED PROPERLY, this may indicate that there is a problem with the coil’s thermocouple. This does NOT mean the unit is faulty.)
• Set the controller box to your desired temperature.(We recommend running your enail controller between 450 and 650 degrees Fahrenheit, running an enail controller higher or lower will result in a less than satisfactory experience while running the risk of damaging the banger.)
• Once the banger/nail is to your desired temperature (usually takes about 30 seconds to heat), pick up the desired amount of concentrates with the tip of a dab tool.
• Place the concentrates on the bottom of the heated surface with the dab tool. (Utilizing the appropriate amount of concentrates based on the size and temperature of the banger or nail, will maximize the cloud size)
• Inhale through the dab rig mouthpiece.

Click Here to Read a More Detailed Explanation of How to Setup and Use an Enail.

Enail FAQ Beginners Guide - Click Here

If your device is still not working correctly, please send an email to info@e-nail.com, stating the specific problem. Please include a picture or video showing the fault and also include your order number.