Terp Slurper Enail FAQ
What is a Terp Slurper Enail?
A terp slurper enail operates much like a traditional quartz banger enail, but with a unique terp slurper banger at its core. It includes a terp slurper enail banger, an enail coil, and a control box. The terp slurper enail banger stands out with its distinct design compared to a standard bucket banger. It features a long bottom chamber attached to a dish, topped by a small bucket with a beveled edge. Instead of placing your dab inside the banger, you place it onto the heated bottom dish.
The beveled top creates an airtight seal when using a marble carb cap, directing airflow from the bottom of the banger rather than through the top. Slanted holes where the terp slurper dish meets the long chamber aid in airflow. As your dab melts onto the dish, it is drawn into the long chamber for vaporization. These holes also help spin dabbing accessories like terp pearls or pills, ensuring rapid, even vaporization in the heated middle chamber.
The terp slurper banger's airflow design sets it apart from other enail bangers by forcing air through the dab rather than over it, as with a bucket banger. This design enhances flavor and efficiency, contributing to the popularity of terp slurpers. The enail coil delivers precise, consistent temperature and heat distribution to the bottom dish of the terp slurper. While achieving 100% efficiency with terp slurper enails poses challenges, mastering the slight learning curve promises incredibly flavorful dabs in no time!
Dabbing Temperature with a Terp Slurper Enail?
Terp slurper enails require more time to heat compared to bucket bangers due to their unique design, which involves heating two areas: the long chamber and the bottom dish. A common mistake is cranking the enail to a high temperature like 650°F to speed up this process, which can easily lead to dab burning.
For optimal dabbing with a terp slurper enail, set the temperature slightly higher than you would for a regular quartz banger. After the coil reaches temperature, allow the banger to sit for 2-3 minutes. This ensures thorough heat transfer to the middle chamber without scorching the dab on the dish. Remember, aim for 425-475°F for low-temp dabs, 475-525°F for medium temp, and 525-600°F for high temp.
We strongly advise against dabbing above 650 degrees as it risks burning your concentrate rather than vaporizing it, potentially posing health risks.
How to dab with an enail terp slurper?
- Step 1: Start by removing your enail controller and power cord from the box. Connect the power cord securely to the controller and plug it directly into a wall outlet (avoid using a power strip).
- Step 2: Attach your enail coil to the enail controller.
- Step 3: Find the terp slurper banger provided in your kit. Slide the quartz rod at the bottom into the center of your enail coil.
- Step 4: Use an o-clamp to firmly secure the enail banger to your enail coil.
- Step 5: Connect your terp slurper banger to your dab rig.
- Step 6: Place your banger accessories, including the marble carb cap, on top of your terp slurper.
After setting up your enail controller box, power it on. Adjust your desired temperature using the up and down arrows on the controller. The temperature display will blink to indicate the coil is heating. Allow 2-3 minutes after reaching your set temperature before you start dabbing.
- Step 7: Use a dab tool to scoop your preferred amount of concentrate and place it onto the bottom dish.
- Step 8: Inhale and enjoy your dab!
Is a Terp Slurper Enail Better than a Regular Quartz Banger Enail?
Terp Slurper Enails and regular Quartz Banger electric nails each have their own strengths and weaknesses. While Terp Slurper enail bangers offer superior flavor, they can be more challenging to clean compared to regular bangers. On the other hand, regular bucket enail bangers are easier to clean but may sacrifice some flavor.
Take a look at this comparison chart for a direct comparison of both!
How Do I Keep my Terp Slurper Enail Banger Clean?
Cleaning a Terp Slurper enail banger follows the same steps as cleaning any other quartz banger. After dabbing, use a cotton swab dipped in isopropyl alcohol to remove any excess reclaim from the bottom of the banger. Some users find it challenging to clean the bottom chamber thoroughly with standard dab swabs, so specific terp slurper swabs with extra cotton at the tip are available for a more precise fit.
For a more thorough cleaning, soak your enail banger overnight in a Dunk Tank filled with a solution of water, salt, and isopropyl alcohol. In the morning, use a cotton swab to wipe away any remaining residue.
The solution effectively loosens most of the buildup, simplifying the cleaning process. Rinse the banger under warm water and wipe it dry. For stubborn residue, heat the banger with your enail before wiping it down. This heat will turn the residue into ash, facilitating easy rinsing.
What is the Best Terp Slurper Enail for Me?
Choosing the right Terp Slurper Enail for your dabbing needs depends on your preferences and style. There are various electronic nail kits available, ranging from 25mm for smaller dabs to 35mm for larger ones.
- For a 25mm Terp Slurper, we recommend dabbing 0.05-0.2g, roughly the size of a single grain of rice.
- Opt for a 30mm Terp Slurper Quartz Banger if you prefer 0.1-0.3g dabs, equivalent to about 1.5 grains of rice.
- For those who enjoy larger dabs, a 35mm Terp Slurper Quartz Banger suits 0.2-0.4g dabs, approximately 2 grains of rice in size.
Each enail dab kit available at e-nail.com includes all the essentials to get you started immediately. For personalized guidance on selecting the best enail kit for you, reach out to our live chat and consult with a dabbing expert!
Terp Slurper Enail FAQ:
Yes! You can use an Enail with a Terp Slurper Banger. However, not all enail coils are compatible with all terp slurper bangers.
- Step 1: Make sure that the terp slurper banger you are purchasing is an enail banger. An enail banger will have an extended rod at the bottom to safely secure your enail coil to.
- Step 2: Measure the size of your enail coil. Your enail coil diameter must match the size of the bottom dish on a terp slurper enail banger. Coil compatible sizes are typically 25mm, 30mm or 35mm.
- Step 3: Assess the type of enail coil you have, do you have an axial coil, hybrid coil, flat coil? Terp slurper enail bangers work best with a "terp slurper coil," which has four wire wraps around it. Hybrid enail coils, which are similar, can also be used.
Axial enail coils are not the best for terp slurper enail bangers because their wire wraps stick out over the top of the dish. However, we created a new terp slurper enail banger design. It features a higher bottom dish wall that can use axial enail coils. The axial enail coil transfers heat better than other option, successfully heating the long chamber.
This was completely based on customer feedback, so when you speak we listen! - to check out our new terp slurper enail bangers and enail coil kits click on the links!
Terp Slurper enail bangers take longer to heat than standard bucket bangers. This is because the heat needs to expand to the middle chamber for peak vaporization. We recommend waiting about 3-5 minutes after your enail coil / controller has reached your desired temperature to start dabbing.
Terp Slurpers Enails are great for both small and large dabs! It ultimately depends on the dish size of your terp slurper quartz enail banger.
- For a 25mm Terp Slurper we would suggest going with a 0.05-0.2g dab which is about the size of 1 grain of rice.
- For a 30mm Terp Slurper Quartz Banger, we suggest a 0.1-0.3g dab which is about 1.5 grains of rice.
- For a 35mm Terp Slurper Quartz Banger, we suggest a 0.2-0.4g dab which is about 2 grains of rice.
The Terp slurper enail banger stands out with its innovative structure, featuring a dish connected to a lower chamber. Wrapped around the dish's base, the enail coil facilitates effective heat transfer. As heat warms the dab, it moves from the dish through air-slots and into the middle chamber. Within this tube, terp pearls or pills rotate, ensuring thorough vaporization of every bit of wax.
The unique airflow which forces the air through the dabs offers maximum flavor and effect. The unique design also offers enhanced flavor by preserving terpene profiles. Which leads to a richer dabbing experience. Additionally, it optimizes wax vaporization, minimizing waste and maximizing satisfaction.
You can use many different dab inserts with Terp Slurper Enail Bangers. Including Marble pill sets, terp screw sets, ball and chain sets, marble and terp pearls sets and more. The choice of dab insert depends on your personal preference and which you like more.
One thing that all these sets have in common is a marble carb cap. Terp slurper enail bangers have a beveled top that pairs with the rounded bottom of a marble. The marble fits snugly against the banger edge, blocking airflow from the top and directing it from the bottom.
The airflow making its way from the bottom to the top is what makes the inserts spin adding to a terp slurpers function!
You can use a Terp Slurper enail banger without terp pearls or a terp pill. However you cannot use it without a marble carb cap. Using a terp slurper without terp pearls or other inserts will reduce how well it vaporizes each dab.
A Terp Slurper Electric Dab Nail is perfect for any kind of dabs, but it works best with flavor-focused ones.
- Live Resin
- Why: A terp slurper enail bangers design preserves and maximizes the high concentration of terpenes found in live resin. Your dabs will taste their best because of the constant heating provided by the enail coil.
- Rosin
- Why: The taste and purity of rosin is what makes rosin so popular. A terp slurper enail achieves full flavor and smoother rips through precise temperature control and efficient vaporization.
- Shatter
- Why: Shatter benefits from the terp slurper's ability to evaporate your dabs evenly, with no waste and full flavor. Sauce is super stable and pretty easy to handle.
- Sauce
- Why: Sauce tends to have a thicker consistency but it also contains a high terpene level. Using sauce with a terp slurper enail is ideal because it offers complete vaporization and even heating.
- Crumble
- Why: Crumbles viscosity melts and vaporizes evenly. You can use crumble with a terp slurper enail to experience full-flavored dabs.
- Budder
- Why: Budders' silky texture pairs nicely with a terp slurper enail producing consistent vaporization and great dab flavors.
- Distillate
- Why: Distillate's effectiveness and strength is what makes it widely recognized by dabbers. You can use distillate with a terp slurper enail for easy, effortless dabs as it vaporizes nicely.
Terp Slurper Enails are adaptable and are excellent when used with concentrates that emphasize flavor and smoothness. Terp slurper enail bangers preserve terpenes and guarantee total vaporization for an improved dabbing experience!