VapeBrat Quatro Pro LCD Enail: Terp Slurper E-nail - Nectar Collector Enail - Titanium E Nail and Quartz Electric Nail Kit

VapeBrat Quatro Pro LCD Enail: Terp Slurper E-nail - Nectar Collector Enail - Titanium E Nail and Quartz Electric Nail Kit

The VapeBrat Quatro Pro LCD Enail Kit comes with a ton of accessories offering a different way to dab each time. Choose from a Terp Slurper Enail setup, a Nectar Collector Enail setup, or a more traditional quartz banger or titanium nail setup!

The Quatro Pro Enail Kit is paired with the VapeBrat X2 Nectar Collector Water Bubbler, a 14mm Titanium Nectar Collector Nail, and a 10mm Barrel Enail Coil to match!

The VapeBrat X2 Bubbler is a premier hand blown borosilicate glass piece, designed to be completely spill proof. The VapeBrat X2 houses a dome percolator, it contains multiple holes at the bottom which pull your vapors into the filtration chamber as you inhale. The construction of the X2 allows for maximum diffusion and filtering of your dabs, which in turn delivers the purest, full flavored, smoothest hits.

The Titanium Nail featured on the VapeBrat X2 has a 14mm Male joint connection to fit any standard 14mm Female Nectar Collector Bubbler. Titanium is ideal for high temperature dabs, it takes a bit longer to heat up than other materials. However, it retains heat longer than quartz would and cools off faster than ceramic. Titanium Nails can reach temperatures upwards of almost 1,500 degrees, (needless to say, you shouldn't run your enail to THAT high of a temperature in any circumstance) its ability to withstand super high temperatures shows how durable and reliable titanium really is.

The Dual Size E-Nail banger included in this kit is meant to fit most rigs, this Banger is a 90 degree Male but can fit 14mm and 18mm joint sizes. The VapeBrat Quatro Pro Dual Size Quartz Banger comes with a set carb cap that features an extended dab tool on it for easy loading and capping.

Note: This E-Nail Banger can only be used with 20mm Barrel Enail coils.

The Titanium Nail included in the VapeBrat Quatro Pro LCD Enail features a universal joint and gender fitting. The top diameter of this nail is 20mm and it fits any standard 20mm barrel enail coil. This titanium nail is ideal to be used with a desktop enail because it features an elongated top portion just below the dish to fit the size of a barrel coil and hold it in place! The Universal 20mm Titanium Nail also features a flat top and a 4mm dish depth for those extra large dabs. Just pair this versatile piece with the included titanium nail carb cap with a dab tool!

The VapeBrat Quatro Pro LCD Enail also comes with a Terp Slurper E-Banger which allows for the same mesmerizing, terp liberating functions of a regular terp slurper. The Terp Slurper Enail Banger also features a beveled top to create a tight seal for a marble carb cap, increasing the airflow through the bottom creating a vacuum effect that terp slurpers are known for. The overall construction is standard, a bucket top, tube, and dish at the bottom, however this enail banger is fully welded for increased durability making it less likely to break where the two pieces of quartz are normally joined together.

Note: This E-Nail Banger can be used with either a flat coil or a 30mm coil.

The Terp Slurper Enail Banger wouldn't be complete if it didnt come with a marble set. Marble sets increase efficiency and lets face it, they look awesome in action. Marble Sets are highly innovative dabbing accessories that also serve an important functional purpose as well. When a terp slurper is paired with a marble set, the bottom terp pill helps to diffuse the airflow and move around your concentrates so that all materials evaporate inside the heated chamber, the middle marble keeps your wax from flying out. Lastly the largest marble is used as a carb cap, capping the airflow so that all the air is directed from the slits at the bottom of your terp slurper, drawing your wax into the heated bottom chamber. For ultimate flavor and to get the most out of your terpenes its best to dab at relatively low temperatures.

Lastly the VapeBrat Quatro Pro LCD Enail comes with both a 30mm Terp Slurper Enail Coil and a 20mm Barrel Enail Coil, and a 10mm Nectar Collector Enail Coil for optimal heat transfer.

The VapeBrat Enail Coil design covers the banger to minimize pooling and waste. The Barrel Enail Coil, the Terp Slurper Enail Coil, and the 10mm Nectar Collector Enail Coil are made of Stainless Steel and a kevlar sheath.

The VapeBrat LCD Enail Controller Box is able to achieve super high temps in a matter of seconds. The VapeBrat LCD features a customized PID for more accurate temperature readings with a less temperature fluctuation than the VapeBrat Micro. Temperature can be set anywhere from 0-1000 Degrees based on preference, even though you can run this thing to almost 1000 degrees, it's probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and the actual temperature of the coil or heated surface, giving the user that added accuracy needed to achieve that perfect dab every time!

Specifications:

LCD PID Controller Box:

• Temperature Range: 0°F to 1000°F
• Size: 4.7" x 3" x 1.6"
• Display: LCD Digital - Set Value and Coil Temp - Touch Screen
• Input: 110V - 250V
• Coil Connection: 5PIN Female XLR
• Pin Set Up: PIN 1: TC+, PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC

NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.

Dual Size Quartz Enail Banger:​

• Joint Size: 14mm-18mm
• Joint Angle: 90 Degree
• Joint Gender: Male
• Banger Bucket Diameter: 16mm
• Banger Bottom Diameter: 20mm
• Bottom Thickness: 2mm
• Neck Connection: Regular Weld
• Top Style: Flat

Note: You can change the Gender and Angle to fit your dab rig by choosing a different selection from the options menu on the right of the product page.

Flat Top Angled Carb Cap and Dab Tool:

• Outer Diameter: 26mm
• Inner Diameter: 23mm
• Length: 3.42 Inches

Universal Titanium Nail:

• Joint Size: 10mm 14mm 18mm
• Joint Gender: Male Female
• Joint Angle: Straight - Compatible with 90 Degree Joint Rigs
• Nail Diameter: 20mm
• Nail Depth: 4mm

Titanium Carb Cap with Dab Tool:​

• Outer Diameter: 25mm
• Inner Diameter: 23mm

Terp Slurper Enail Banger:​

• Joint Size: 14mm
• Joint Angle: 90 Degree
• Joint Gender: Male
• Banger Bucket Diameter: 22mm
• Banger Bottom Diameter: 30mm
• Neck Connection: Fully Welded
• Top Style: Beveled

Note: You can change the Gender and Angle to fit your dab rig by choosing a different selection from the options menu on the right of the product page.

Marble Set:​

• Large Carb Cap Marble: 23mm Diameter
• Middle Smaller Marble: 15mm Diameter
• Terp Pill: 5mm Diameter

VapeBrat X2 Nectar Collector:

• Joint Size: 14mm
• Joint Gender: Female - Compatible with 14mm Male Nails
• Height: 6 Inches When Assembled
• Percolator: Inline Perc

14mm Titanium Nail:

• Joint Size: 14mm
• Joint Gender: Male
• Joint Angle: Straight - For Nectar Collectors
• Height: 3 Inches
• Material: Grade 2 Titanium
• Domed Bottom with a Screw Fit for a Secure Connection with the E-Nail Coil

30mm Terp Slurper Axial Enail Coil:​

• Size: 30mm - Compatible with 30mm Diameter Bangers
• Coil Style: Axial Hybrid - Double Wrap
• Coil Material: Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type

20mm Barrel Enail Coil:​

• Size: 20mm - Compatible with 20mm Diameter Bangers
• Coil Style: Barrel
• Coil Material: Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type

10mm Barrel Nectar Collector Enail Coil:​

• Size: 10mm - Compatible with 14mm Titanium Nails
• Coil Style: Barrel
• Coil Material: Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type
• 30 Day Warranty on Coil

Features:​

• Controller Box Low Energy Usage
• Can be Used with 250V 6 Amp Fuse - Fuse Protection
• Steady Temperature Control With No Overshoot
• Quick Heat Up
• ON/OFF Touch Button for Box
• Titanium Nail Universal Size and Gender
  • Can be Used with Male and Female Joint Rigs
  • Can be Used with 10mm, 14mm, and 18mm Joint Size Rigs
• Quartz Bucket with Flat Top with a Thick 2mm Bottom
  • Dual Size to Fit 14mm and 18mm Rigs
  • Extended Quartz Arm to Hold Enail Coil
• Terp Slurper with Marble Set Combination for More Evenly Heated Dabs
• Terp Slurper Axial Coil Style for Top Notch Heat Distribution
• Upgrade Any Nectar Collector to An Enail Nectar Collector
  • 10mm Barrel Nectar Collector Enail Coil Style for Top Notch Heat Distribution
  • VapeBrat X2 Bubbler for Optimal Water Filtration

Includes:

• 1 x VapeBrat LCD Enail Controller Box with LCD Display
• 1 x VapeBrat Regular Weld Dual Size Quartz E-Nail Banger: 14mm-18mm Male 90 Degree
• 1 x VapeBrat Flat Top Angled Carb Cap and Dab Tool
• 1 x VapeBrat Universal Titanium Nail (Fits 10mm/14mm/18mm Male and Female)
• 1 x VapeBrat Titanium Dab Tool Carb Cap
• 1 x VapeBrat Fully Welded Terp Slurper 14mm Male 90 Degree Angle
• 1 x Marble Pill 3 Piece Set
• 1 x O-Clamp
• 1 x 14mm to 18mm Female to Male Adapter
• 1 x 5ft 20mm Barrel Enail Heater Coil
• 1 x VapeBrat X2 Nectar Collector Bubbler
• 1 x 14mm Titanium Nail for Nectar Collector
• 1 x 10mm Barrel Coil
• 1 x Keck Clip
• 1 x 6ft Long Power Cord
• 2 x Silicone Jars
• Travel Case Sold Separately
• Instruction & Troubleshooting Manual
• BONG NOT INCLUDED

Quick Tip:

How to Dab with and Use an E-Nail?

• Plug in all of the parts, connect the nail/banger and rig
• The controller box can now be turned on, most enail controller boxes will have a switch or a button to turn it on and off. (If you see an error code on the display screen after the controller box is turned on and the COIL IS CONNECTED PROPERLY, this may indicate that there is a problem with the coil’s thermocouple. This does NOT mean the unit is faulty.)
• Set the controller box to your desired temperature.(We recommend running your enail controller between 450 and 650 degrees Fahrenheit, running an enail controller higher or lower will result in a less than satisfactory experience while running the risk of damaging the banger.)
• Once the banger/nail is to your desired temperature (usually takes about 30 seconds to heat), pick up the desired amount of concentrates with the tip of a dab tool.
• Place the concentrates on the bottom of the heated surface with the dab tool. (Utilizing the appropriate amount of concentrates based on the size and temperature of the banger or nail, will maximize the cloud size)
• Inhale through the dab rig mouthpiece.

Click Here to Read a More Detailed Explanation of How to Setup and Use an Enail.

Enail FAQ Beginners Guide - Click Here