VapeBrat LCD Enail: Quartz Banger Dab Enail - 30mm

VapeBrat LCD Enail: Quartz Banger Dab Enail - 30mm

The Enail Banger included with the VapeBrat LCD 30mm Enail Kit features a flat top to create a flush seal when a carb cap is placed on top, this seal actually helps create more pressure allowing for lower temperature dabs and smoother rips. This banger is paired with an 8mm o-clamp, meaning there is a short rod extended from the bottom of the banger an oclamp around it to fasten your enail coil in place. 

30mm Axial Enail Coil, LCD E Nail Controller Box, Quartz Enail Banger, and Directional Bubble Carb Cap

An o-clamp is the safest way to use an enail coil, these tiny clamps help to keep your coil secure and fitting snug so that it never gets loose or falls off potentially burning any materials below it. 

Note: This E-Nail Banger is best used with a 30mm axial coil.

This set also includes a VapeBrat Directional Bubble Cap can direct your airflow with a simple to operate ball-and-socket mechanism, move and twist the cap using the handle to get the bottom portion of the carb cap to spin your terp pearls around, or use it without terp pearls for a more evenly vaporized dab. This VapeBrat Directional Bubble Carb Cap is made out of 100% borosilicate glass, and features a traditional bubble carb cap design. The reason why bubble caps are so popular in the dabbing world is because they create a perfect seal when placed onto a flat top or beveled top banger. The extended handle contains an airflow hole which can be capped by your finger or left open for more air to flow through, resulting in more intense rips.

The VapeBrat LCD Enail Controller Box is able to achieve super high temps in a matter of seconds. The VapeBrat LCD features more accurate temperature readings with a less temperature fluctuation than the VapeBrat Micro. Temperature can be set anywhere from 0-1000 Degrees based on preference, even though you can run this thing to almost 1000 degrees, its probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and the actual temperature of the coil or heated surface, giving the user that added accuracy needed to achieve that perfect dab every time. Just set this enail to your desired temp and dab on my fellow VapeBrat... dab on!

Lastly the VapeBrat Quartz Banger Enail Kit comes with a 30mm Axial Enail Coil for optimal heat transfer to the entire bottom surface area as well as the side walls of the enail banger. This coil design covers a majority of the banger to minimize pooling and waste. The Axial Coil is made out of Stainless Steel and a kevlar sheath.

Specifications:

LCD PID Controller Box:

• Temperature Range: 0°F to 1000°F
• Size: 4.7" x 3" x 1.6"
• Display: LCD Digital - Set Value and Coil Temp - Touch Screen
• Input: 110V - 250V
• Coil Connection: 5PIN Female XLR
• Pin Set Up: PIN 1: TC+, PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC

NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.

Quartz Bucket Enail Banger:​

• Joint Size: 14mm
• Joint Angle: 90 Degree
• Joint Gender: Male
• Banger Bucket Diameter: 25mm
• Banger Bottom Diameter: 30mm
• Neck Connection: Regular Weld
• Top Style: Flat

Note: You can change the Gender and Angle to fit your dab rig by choosing a different selection from the options menu on the right of the product page.

Directional Bubble Cap:

• Height: 61mm
• Diameter: 29mm
• Insertable Diameter: 7mm

30mm Axial Enail Coil:​

• Size: 30mm - Compatible with 30mm Diameter Bangers
• Coil Style: Axial - 5 Wraps
• Coil Material: Stainless Steal
• Sheath: Kevlar
• Thermocouple: K Type

Features:​

• Controller Box Low Energy Usage
• Can be Used with 250V 6 Amp Fuse - Fuse Protection
• Steady Temperature Control With No Overshoot
• Controller Box Contains a PID Microprocessor
• Quick Heat Up
• ON/OFF Touch Button for Box
• 30mm Banger with Axial Coil for Maximum Heat Distribution
• Directional Bubble Cap for More Evenly Vaporized Dabs

Includes:

• 1 x VapeBrat LCD Enail Controller Box with LCD Display
• 1 x VapeBrat Regular Weld Quartz Banger: 14mm Male 90 Degree
• 1 x VapeBrat Directional Bubble Carb Cap
• 1 x O-Clamp
• 1 x 5ft 30mm Axial Enail Heater Coil
• 1 x 6ft Long Power Cord
• 2 x Silicone Jars
• Travel Case Sold Separately
• Instruction & Troubleshooting Manual
• BONG NOT INCLUDED

Quick Tip:

Bangers are one of those items that warrant a bit of a splurge to make sure your experience is as elevated as can be.​​

#5. Banger Accessories

While picking your banger, it is also important to note and pay attention to the kind of accessories you pair with it, such as a carb cap, terp pearls or pills, and marbles.

Terp Pearls: Also known as Banger Beads or Terp Balls, these are small quartz balls, placed inside the banger (1 or 2) which when paired with the appropriate directional airflow carb cap (namely a vortex carb cap) spin around the banger during inhalation. The spinning of the terp pearls helps evenly distribute the concentrate across the surface area of the banger, preventing hot spots, and creating an evenly heated area for a consistent experience. This allows for a higher vaporization rate even at lower temps as the saturation rate is evenly distributed.

To Read The Ultimate Bucket Banger Buying Guide Click Here!