VapeBrat Electric Nectar Collector Enail Kit

VapeBrat Electric Nectar Collector Enail Kit

Turn any ordinary Nectar Collector into an Enail Nectar Collector with this extraordinary kit! The VapeBrat Nectar Collector Enail comes with a unique titanium nail with a domed bottom to hold your enail coil securely in place. This is a much safer option, although some people opt to use a clamp at the bottom of the nail. The VapeBrat E-Nectar Collector Kit comes with a bubbler as well so that you have everything needed to get started right away! 

This Enail kit is the perfect option if you're looking for a new way to enjoy your dabs!

Micro Enail Controller Box:

• The VapeBrat Micro Enail Controller Box is able to achieve super high temps in a matter of 2 minutes or less. The Micro features a customized PID for more accurate temperature readings with a slight fluctuation of about 0.2%. Temperature can be set anywhere from 0-999 Degrees based on preference, even though you can run this thing to almost 1000 degrees, it's probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and not the actual temperature of the coil or heated surface, but with the help of the Octave or Terpometer, for added accuracy, you can achieve that perfect dab every time. Just set this enail to your desired temp and dab on my fellow VapeBrat... dab on!

The VapeBrat Kit also comes with a VapeBrat X2 Nectar Collector:

VapeBrat X2 Nectar Collector:

• The VapeBrat X2 Nectar Collector Water Bubbler that comes with the VapeBrat Electric Nectar Collector Enail is a premier hand blown borosilicate glass piece, designed to be completely spill proof. The VapeBrat X2 houses a dome percolator, it contains multiple holes at the bottom which pull your vapors into the filtration chamber as you inhale. The construction of the VapeBrat X2 Glass Bubbler allows for maximum filtering of your dabs, which in turn delivers the purest, full flavored, smoothest hits. The VapeBrat X2 can be used with any 14mm Nectar Collector Nail, the holes at the bottom of the percolator should be about one centimeter beneath the water level for optimal performance.

14mm Nectar Colelctor Titanium Nail:

• The Nectar Collector Titanium Nail featured on the VapeBrat Electric Nectar Collector Enail has a 14mm Male joint connection to fit any standard 14mm Female Nectar Collector Bubbler. Titanium is the most ideal material for hotter temperature dabs since it retains heat longer than quartz would and cools off faster than ceramic.

• The 14mm Nectar Collector Titanium Nail has been updated to have a domed shaped bottom that screws into the 14mm Male body, the enail coil sits in between the dome and the joint. This is the most secure connection for an enail coil and a titanium nail!

Lastly the VapeBrat Nectar Collector Enail Kit comes with a 10mm Barrel Coil.

10mm Barrel Coil:

• The 10mm Barrel Enail Coil is paired up with the VapeBrat Nectar Collector Enail Kit for optimal heat transfer to the 14mm Titanium Nectar Collector Nail. This enail coil design covers the entire nectar collecting tube for precision heating of your wax.

The Barrel Enail Coil is made out of Stainless Steel and a kevlar sheath.

Specifications:

Micro PID Controller Box:

• Temperature Range: 0°F to 999°F
• Size: 5" x 3.5" x 1.5"
• Display: Flat Digital - Set Value
• Coil Connection: 5PIN Female XLR
• Temperature Precision: 0.2% FS
• Pin Set Up: PIN 1: TC+, PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC
• 1 Year Warranty on Controller Box

NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.

10mm Barrel Enail Coil:​

• Size: 10mm - Compatible with 14mm Titanium Nails
• Coil Style: Barrel
• Coil Material: Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type
• 30 Day Warranty on Enail Coil

14mm Titanium Nail:

• Joint Size: 14mm
• Joint Gender: Male
• Joint Angle: Straight - For Nectar Collectors
• Height: 3 Inches
• Material: Grade 2 Titanium
• Domed Bottom with a Screw Fit for a Secure Connection with the E-Nail Coil

VapeBrat X2 Nectar Collector:

• Joint Size: 14mm
• Joint Gender: Female - Compatible with 14mm Male Nails
• Height: 6 Inches When Assembled
• Percolator: Inline Perc

Features:​

• Controller Box Low Energy Usage
• Can be Used with 250V 6 Amp Fuse - Fuse Protection
• Steady Temperature Control With Almost No Overshoot
• Controller Box Contains a PID Microprocessor
• Quick Heat Up
• ON/OFF Push Button for Box
• Upgrade Any Nectar Collector to An Enail Nectar Collector
• 10mm Barrel Coil Style for Top Notch Heat Distribution
• VapeBrat X2 Bubbler for Water Filtration

Includes:

• 1 x VapeBrat Micro Enail Controller with Digital Display
• 1 x VapeBrat X2 Nectar Collector Bubbler
• 1 x 14mm Titanium Nail for Nectar Collector
• 1 x 10mm Barrel Coil
• 1 x 6ft Long Power Cord
• 1 x Keck Clip
• 1 x O-Clamp
• 2 x Silicone Jars
• Travel Case Sold Separately
• Instruction & Troubleshooting Manual

Quick Tip:

What temperature should I set my enail to?

The recommended temperature ranges between 450-650 depending upon your preferences.

To Read the Enail FAQ Beginners Guide - Click Here