Focus V Carta 2: Atomizer - IntelliCore Dry

How is the Carta 2 Different from the OG Carta?

• The Carta 2 has a larger atomizer measuring at 14mm compared to the OG Carta atomizer measuring at 10mm.
• The Carta 2 features a digital display with time and temperature control.
• You can customize presets through the Carta 2 app and on the Carta 2 unit, instead of just the app.
• The Carta 2 features a new ergonomic design.
• The Carta 2 has integrated batteries while the OG Carta has non-integrated batteries, non-integrated means the batteries can be taken out of the device and charged through a battery charger.
• The Carta 2 comes with quartz coated ceramic inserts, quartz for more flavorful dabs and ceramic aiding in heat retention.
• The Carta 2 atomizer features 360 heating, which means the heating element circles the entire insert (the side walls and the bottom), for a more evenly heated dab.

How Do I Use My Carta 2? How Do I Start a Session on My Carta 2?

• 1. To power on the Carta 2 click the circle button (o) five times quickly.
• 2. After the Carta 2 is powered on, click the down button (-) one time to access the temperature adjustment section, then click the up button (+) or down button (-) to adjust the shown temperature to display your desired temperature.
• 3. After the display shows your desired temperature allow the Carta 2 to return to the home screen to automatically save the desired temperature setting.
• 4. One on the home screen, you can adjust the time of your session by clicking the up button (+) one time, then click the up button (+) or down button (-) to select your desired session time.
• 5. After the display shows your desired session time and allow the Carta 2 to return to the home screen to automatically save the desired session time.
• 6. Place your concentrates into the atomizer.
• 7. Start your session by clicking the circle button (o) two times. The Carta 2 will vibrate upon initiating heat up.
• 8. Once the Carta 2 reaches your selected temperature, the device will vibrate once again and the countdown sequence will begin.
• 9. To extend the session click the circle button (o) two times, this will extend the session by 10 second increments.

How Do I Clean My Carta 2?

• 1. Wait until the atomizer is cool to the touch and remove the atomizer from the base.
• 2. Remove the silicone top of the atomizer and soak it in isopropyl alcohol, you can soak the atomizer while it is assembled with the insert. Do not attempt to pull it apart to avoid damaging any components of the atomizer.
• 3. After the atomizer has soaked for 15 minutes to an hour use a cotton swab to remove any access residue.
• 4. If there is left over residue that will not easily come off, pour a small amount of isopropyl alcohol into the atomizer and use a dab tool to scrape the residue off the bottom.
• 5. Let the atomizer dry completely before use.
• 6. Next, remove the glass attachment from the base.
• 7. Rise the glass attachment with water to remove any excess residue, you can give it a good shake with the travel cap on top to get a better clean.
• 8. Pour out water and pour in isopropyl alcohol into the glass attachment, again capping the top with the travel cap and shaking. Let soak with isopropyl alcohol remaining inside.
• 9. Can clean the outer portion of the glass with cotton swabs soaked in iso, paper towel dipped in iso, or terp wipes.
• 10. Rinse the glass attachment with water until clean.
• 11. Use cotton swabs dipped in isopropyl alcohol to clean the atomizer connection point on the base. Make sure to fully clean the connections.
• 12. Clean the ring around the base where the glass attachment is placed, you can use a dab tool to remove any excess residue that may be stuck in the airpath.
• 13. Assemble all parts when fully dry.

If you are experiencing any issues with this device or have any additional questions, please send an email to info@e-nail.com, stating the specific problem. Please include a picture or video showing the fault and also include your order number.