Exxus VRS 3 in 1 Concentrate Vaporizer

Exxus VRS 3 in 1 Electric Nectar Collector, Dab Pen, and Portable ENail

The Exxus VRS 3 in 1 is a three in one multi use device, it can be used as an Electric Nectar Collector, Concentrate Wax Pen, or a Portable E-Nail, no matter what you do with your concentrates, the VRS will surely accommodate.

This versatile device has three temperature settings, 370 Degrees being the lowest setting, 400 Degrees medium, and 425 Degrees being the highest. The lowest and medium setting should be utilized when you are looking for the most flavorful hits from your concentrates. The highest setting is for when you'd like bigger satisfying hits with larger clouds.

Despite the Exxus VRS 3 in 1's smaller appearance and 3.5 Inch height, it actually contains an 850mAh integrated battery which is bigger than some electric nectar collectors and dab pens on the market. This device is sure to last you roughly 20-25 sessions, and when the battery runs low it charges up to a full charge in less than 2 hours!

The Electric Nectar Collector portion of the VRS is pretty straight forward and it kind of resembles the G9 GDip. To set up your VRS as a e-nectar collector attach the included crushed quartz coil and the water bubbler attachment. The glass attachment features a dome perc, perfect to cool off and filter your hits which provides that less harsh, smooth, enjoyable experience. There you have it, you're ready to start dabbing into your precious concentrates!

The Electric Nectar Collector coil, as mentioned previously is made of crushed quartz, but if you are looking for a ceramic option, this device is compatible with the Lookah Seahorse Pro Ceramic Coils, and if you are having a hard time finding the quartz coil replacements you can also use the Lookah Seahorse Pro Quartz Coils. The only con of using these alternative options is that the cap does not stay on due to the different design of the coil base.

The VRS can be easily converted into a portable enail by attaching the atomizer included and the 14mm glass adapter. This device fits 14mm Male Connection Pipes or Rigs, or if needed we do carry an 18mm Portable E-Nail adapter that is compatible, however it is sold separately. If your favorite rig has a 10mm or a female connection, check out our adapters section to find one that will fit the VRS and your water pipe! The Portable Enail Atomizer on the Exxus VRS is made up of both crushed quartz and ceramic, crushed quartz is at the bottom floor of the atomizer and the walls are ceramic!

The Exxus VRS has a 510 thread connection so you can also use it with your cartridges or Wax Tanks while you are on the go, and comes with a ton of features like haptic feedback. Haptic Feedback means the device will vibrate when its reached your desired temperature which ensures you are always getting perfectly timed hits! It also features a 15 second sesh mode, so that you can get continuous hits for 15 seconds at a time without having to wait for your VRS to heat up again! The last feature id like to mention is the carb on the side of the device, when pressed down it opens a hole allowing air to flow freely through, giving you the option to adjust your airflow based on your preference!

NOTE : You should not fill the glass water attachment with a ton of water, the water level should be just below the air flow holes. Never fill the attachment while it is still connected to the device! Do not completely fill the Portable E-Nail Atomizer with concentrates, it will flood and ruin it.

Specifications:

• Height: 3.5 Inches (without water bubbler)
• Battery: 850mAh
• Charging: Micro USB
• Charge Time: 2 Hours
• Temperature Settings: 3 Temperature Settings (370 - 400 - 430 Degrees)
• Ceramic & Crushed Quartz Enail Coil
• Crushed Quartz Electric Nectar Collector Coil

Features:

• 15 Second Sesh Mode
• Haptic Feedback
• Multi-use Device
• Travel Friendly - Comes with Carrying Case
• Multiple Coil Options
• Adjustable Airflow
• Smaller Size makes it Portable

Includes:

• 1 x Exxus VRS Battery
• 1 x Hydro Tube - Water Bubbler Attachment
• 1 x Ceramic & Quartz Atomizer
• 1 x Water Bubbler Glass Connection Piece
• 1 x Crushed Quartz Heating Tip - For E-Nectar Collector SetUp
• 1 x 14mm Glass Adapter
• 5 x Cleaning Tools
• 1 x Loading Tool
• 2 x Replacement O-rings for Water Bubbler Attachment
• 1 x USB Charging Cable

Quick Tip

Maintaining a Nectar Collector

Once you’ve gotten the hang of operating a nectar collector, whether it be electric or manual, you’ll need to maintain it. Ultimately, cleaning it after each use will keep the actual cleaning process simple, fast, and efficient, but if you can’t do that, try to clean it after each third or fourth use.

Cleaning a nectar collector is rather straightforward via two methods:

• Over-saturating the coil will decrease the coils vaporization rate (decreasing the cloud size). It is always recommended to slightly touch the edge of the concentrates with the coil tip, never dipping it into concentrate. Doing a cleaning cycle, will prevent gunking of your coil while increasing the lifespan and taste.
• Ideally after every use, by the end of the second cycle (a frequent clean method) no vapor should be rising from the coil, meaning there are no excess concentrates remaining. This can be done by waiting for optimal heating temp of the device to consume the appropriate amount based on the coils vaporization rate then running a second cycle after with little to no additional concentrates touching the coil.
• To clean your e-nectar collector, soak a long cotton swab in our Formula 710 Cleaning Solution then clean the airway of your device to remove any remaining reclaim.

Proper Storage of your nectar collector will elongate your products lifespan. Some coils and devices are more fragile than others, keeping your device in a safe case is recommended. So, find a safe spot to store your nectar collector where it will not risk breaking.

Read more about The Best E-Nectar Collectors of 2021 by Clicking Here!