Dab Rig Enail Kit - VapeBrat LCD 25mm E Nail with Recycler Rig and Enail Cleaning Kit

Dab Rig Enail Kit - VapeBrat LCD 25mm E Nail with Recycler Rig and Enail Cleaning Kit

If you're looking for a versatile all in one dab rig enail kit for your favorite dabber or even for yourself, look no further than this inclusive Enail Kit!

Includes:

• 1 x VapeBrat LCD Enail Controller Box with LCD Display
• 1 x VapeBrat Regular Weld Quartz Banger: 14mm Male 90 Degree
• 1 x VapeBrat Directional Bubble Carb Cap 
• 1 x O-Clamp
• 1 x 5ft 25mm Axial Enail Heater Coil
• 1 x 6ft Long Power Cord
• 2 x Silicone Jars
• 1 x VapeBrat Swirl Recycler Dab Rig
• 1 x The Depot Cleaning Swabs
• 1 x Trash Bin Storage
• 1 x Iso Shine Alcohol Cleaner
• 1 x V1 Iso Station
• 40 x Terp Wipes Alcohol Cleaning Wipes
• Travel Case Sold Separately
• Instruction & Troubleshooting Manual
• BONG NOT INCLUDED

The 25mm quartz banger enail kit is a remarkable upgrade from the beloved Copa enail. This larger-diameter banger is ready to produce those impressive clouds of vapor from your heartier dabs. Connected to the enail coil by a secure 8mm o-clamp, it features a rod extending from the base, ensuring stability and reducing the risk of accidents.

Safety is paramount, and the o-clamp connection guarantees your enail coil stays firmly in place, preventing any mishaps. The flat top design of the Enail Banger allows for a perfect seal when a carb cap is placed on top. This seal not only increases pressure but also facilitates lower temperature dabs and smoother rips, providing a truly elevated dab experience!

Get ready to be amazed with the VapeBrat LCD Enail Controller box! This powerhouse heats up to super high temperatures in the blink of an eye, giving you blazing fast results. The VapeBrat LCD boasts a tailored PID for pinpoint precision temperature control, surpassing even the VapeBrat Micro with its minimal temp fluctuations. You have the power to dial in anywhere from 0 to a sizzling 1000 Degrees, but remember your dabbing sweet spot lies between 500 and 650 degrees for optimal performance.

Keep an eye on your session with the digital display, which showcases both your set temperature and the actual heat of the coil or surface. This extra level of accuracy ensures you hit that perfect dab every single time. So, just pick your desired temp, and let the good times roll, my fellow VapeBrat!

Note: This E-Nail Banger is best used with a 25mm axial coil. 

Another component of this kit is the VapeBrat Directional Bubble Cap can direct your airflow with a simple to operate ball-and-socket design. Move and twist the cap using the handle to get the bottom of the carb cap to spin your terp pearls around. Or you can use it without terp pearls for a more evenly vaporized dab! The extended handle also contains an airflow hole which can be capped by your finger or left open for more air to flow through, resulting in more intense rips.

Lastly the VapeBrat Quartz Banger Enail Kit comes with a 25mm Axial Enail Coil for optimal heat transfer to the entire bottom surface area as well as the side walls of the enail banger. This coil design covers a majority of the banger to minimize pooling and waste.

Specifications:

LCD PID Controller Box:

• Temperature Range: 0°F to 1000°F
• Size: 4.7" x 3" x 1.6"
• Display: LCD Digital - Set Value and Coil Temp - Touch Screen
• Input: 110V - 250V
• Coil Connection: 5PIN Female XLR
• Pin Set Up: PIN 1: TC-, PIN 2: TC+, PIN 3: Ground, PIN 4: AC, PIN 5: AC

NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.

Features:​

• Controller Box Low Energy Usage
• Can be Used with 250V 6 Amp Fuse - Fuse Protection
• Steady Temperature Control With No Overshoot
• Controller Box Contains a PID Microprocessor
• Quick Heat Up
• ON/OFF Touch Button for Box