Auto Spinner Banger Enail : VapeBrat LCD 25mm Enail

Auto Spinner Banger Enail : VapeBrat LCD 25mm Enail

Experience the peak of dab spinning with the Auto Spinner Banger Enail kit. This comprehensive e nail kit includes a full weld auto spinner banger and a spinner bubble cap. Ensuring optimal airflow for complete vaporization of your dab with every use.

Includes:

• 1 x VapeBrat LCD Enail Controller Box with LCD Display
• 1 x VapeBrat Full Weld Auto Spinner Quartz Banger: 14mm Male 90 Degree
• 1 x VapeBrat Spinner Bubble Carb Cap
• 2 x Quartz Terp Pearls
• 1 x O-Clamp
• 1 x 25mm Enail Coil - Axial Style
• 1 x Power Cord
• 2 x Silicone Jars
• Travel Case Sold Separately 
• Enail Coil Stand Sold Separately
• Dab Rig Not Included

Accompanying this highly efficient kit is an LCD controller box. This advanced enail controller displays both your set temperature and the actual coil temperature. This allows for precise customization of your dabbing experience. With its touch screen display, the controller adds a luxurious touch to your dabbing setup.

Lets not forget the essential component that binds every e nail kit together, an enail coil. This 25mm enail coil is an axial style coil which resembles the shape of a bucket with a bottom covering. Our e-nail coils have undergone continuous improvement to ensure the best dabbing experience for our customers.

With 6-7 wraps, it covers the bottom section of your banger and most of the side walls. Rest assured, VapeBrat e nail coils guarantee optimal heat distribution!

Specifications:

LCD PID Controller Box:

• Temperature Range: 0 F to 1000 F
• Size: 4.7" x 3" x 1.6"
• Display: LCD Digital - Set Value and Coil Temp - Touch Screen
• Input: 110V - 250V
• Coil Connection: 5PIN Female XLR
• Pin Set Up: PIN 1: TC+, PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC

Note: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.

Auto Spinner Enail Banger:​

• Joint Size: 14mm 
• Joint Angle: 90 Degree
• Joint Gender: Male
• Banger Bucket Diameter: 21mm
• Banger Bottom Diameter: 25mm
• Neck Connection: Full Weld
• Top Style: Beveled

Note: You can change the Gender and Angle to fit your dab rig by choosing a different selection from the options menu on the right of the product page.

Spinner Bubble Cap:

• Diameter: 25mm
• Insertable Diameter: 13mm

25mm Axial Enail Coil:​

• Size: 25mm - Compatible with 25mm Diameter Bangers
• Coil Style: Axial - 7 Wraps
• Coil Material: Stainless Steal
• Sheath: Kevlar
• Thermocouple: K Type

Quick Tip:

How Do I Get My LCD Enail To Initiate a Heating Cycle?

Step #8: To set the controller box to your desired temperature, use the arrow buttons to adjust up or down. Once the display shows your chosen temperature, hold the power button for a few seconds to start heating the coil. Avoid pressing the M button for temperature settings, as it is used for accessing settings like switching between Fahrenheit and Celsius.

• We advise against running your e-nail controller above 650 degrees Fahrenheit. Extremely high temperatures can damage or crack your banger.
• Additionally, high temperatures are inefficient for concentrate consumption, as they burn rather than vaporize your concentrates, leading to waste.
• Setting the controller above 650 degrees can also cause significant residue buildup on your dab nail or banger, making it nearly impossible to clean and potentially necessitating the purchase of a new one.

How to Use the VapeBrat LCD Enail - Intructions