VapeBrat Quatro Enail - Terp Slurper Enail, Titanium Enail, Quartz Bucket Banger Enail, and Nectar Collector Enail Kit

VapeBrat Quatro Enail:

Terp Slurper Enail, Titanium Enail, Quartz Bucket Banger Enail, and Nectar Collector Enail Kit. First things first, the VapeBrat Quatro Enail Kit includes a Micro Enail Controller Box.

Micro Enail Controller Box:

• The VapeBrat Micro Enail Controller Box is able to achieve super high temps in a matter of 2 minutes or less. The Micro features a customized PID for more accurate temperature readings with a slight fluctuation of about 0.2%. Temperature can be set anywhere from 0-999 Degrees based on preference, even though you can run this thing to almost 1000 degrees, it's probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and not the actual temperature of the coil or heated surface, but with the help of the Octave or Terpometer, for added accuracy, you can achieve that perfect dab every time.

The VapeBrat Quatro Kit also comes with a Terp Slurper E-Banger, Titanium Nail, a Dual Size Bucket Enail Banger, and the X2 Nectar Collector.

Terp Slurper Enail Banger with Marble Set:

• The Terp Slurper Enail Banger allows for the same mesmerizing, terp liberating functions of a regular terp slurper, however this banger has an extended quartz rod sticking out from the bottom "terp dish" to secure your enail coil in place by an 8mm o-clamp, reducing the risk of the coil falling off and potentially burning you or anything under it. The Terp Slurper Enail Banger also features a beveled top to create a tight seal for a marble carb cap, When a terp slurper is paired with a marble set, the bottom terp pill helps to diffuse the airflow and move around your concentrates so that all materials evaporate inside the heated chamber, the middle marble is used to keep the terp pill from flying out. Lastly the largest marble is used as a carb cap, capping the airflow so that all the air is directed from the slits at the bottom of your terp slurper, drawing your wax into the heated bottom chamber. For ultimate flavor and to get the most out of your terpenes its best to dab at relatively low temperatures. This enail banger is fully welded for increased durability making it less likely to break where the two pieces of quartz are normally joined together.

Note: This Terp Slurper E-Nail Banger can be used with either a flat coil or a 30mm coil.

Universal Titanium Nail:

• This nifty Titanium Nail gets its name from its universal joint and gender fitting. The top diameter on this guy is 20mm and it fits any standard 20mm barrel enail coil. This titanium nail is ideal to be used with a desktop enail because it features an elongated top portion just below the dish to fit the size of a barrel coil and hold it in place! The Universal 20mm Titanium Nail also features a flat top and a 4mm dish depth for those extra large dabs. Just pair this versatile piece with a titanium nail carb cap with a dab tool and you're golden!

• This bucket banger gets its name from its joint, the top larger portion of the joint fits 18mm Female rigs and the lower, smaller joint fits 14mm Female rigs. The bucket diameter on this guy is 20mm and it fits any standard axial or barrel 20mm coils. This banger is considered an E-Nail Banger because it features a quartz arm extending from the neck which is used as a holder for your enail coil! The Dual Size Enail Banger also features a flat top and an extra thick 2mm bottom for optimal heat retention.

X2 Nectar Collector:

• The VapeBrat X2 Nectar Collector Water Bubbler is a premier hand blown borosilicate glass piece, designed to be completely spill proof. The VapeBrat X2 houses a dome percolator, it contains multiple holes at the bottom which pull your vapors into the filtration chamber as you inhale. The construction of the VapeBrat X2 Glass Bubbler allows for maximum diffusion and filtering of your dabs, which in turn delivers the purest, full flavored, smoothest hits. The VapeBrat X2 can be used with any 14mm Joint Nectar Collector Nail, the holes at the bottom of the percolator should be about one centimeter beneath the water level for optimal performance.

• The Titanium Nail featured on the VapeBrat X2 has a 14mm Male joint connection to fit any standard 14mm Female Nectar Collector Bubbler. Titanium is ideal for high temperature dabs, it takes a bit longer to heat up than other materials. However, it retains heat longer than quartz would and cools off faster than ceramic. Titanium Nails can reach temperatures upwards of almost 1,500 degrees, (needless to say, you shouldn't run your enail to THAT high of a temperature in any circumstance) its ability to withstand super high temperatures shows how durable and reliable titanium really is.

Lastly the Quatro Enail Kit comes with a 30mm Axial Hybrid Enail Coil, a 20mm Barrel Enail Coil, and a 10mm Barrel Enail Coil for Nectar Collecting.

30mm Terp Slurper Enail Coil:

• The 30mm Terp Slurper Enail Coil is paired up with the VapeBrat Terp Slurper Enail Banger for optimal heat transfer to the terp slurper "dish". This coil design covers the entire bottom and sides of the dish to minimize pooling and waste.

20mm Barrel Enail Coil:

• The 20mm Barrel Coil is paired up with the Universal Titanium Nail and the Quartz Bucket Enail Banger, it fits perfectly on both for optimal heat transfer.

10mm Barrel Enail Coil:​

• The 10mm Barrel Enail Coil is paired up with the VapeBrat X2 Nectar Collector for optimal heat transfer to the 14mm Titanium Nail. This coil design covers the entire nectar collecting tube for precision heating for your concentrates.

All three enail coils, the Axial Coil and both Barrel Coils are made of Stainless Steel and a kevlar sheath.

Specifications:

Micro PID Controller Box:

• Temperature Range: 0°F to 999°F
• Size: 5" x 3.5" x 1.5"
• Display: Flat Digital - Set Value
• Coil Connection: 5PIN Female XLR
• Temperature Precision: 0.2% FS
• Pin Set Up: PIN 1: TC+, PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC
• 1 Year Warranty on Controller Box

NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.​​

Terp Slurper Enail Banger:​

• Joint Size: 14mm
• Joint Angle: 90 Degree
• Joint Gender: Male
• Banger Bucket Diameter: 22mm
• Banger Bottom Diameter: 30mm
• Neck Connection: Fully Welded
• Top Style: Beveled

Note: You can change the Gender and Angle to fit your dab rig by choosing a different selection from the options menu on the right of the product page.

Marble Set:​

• Large Carb Cap Marble: 23mm Diameter
• Middle Smaller Marble: 15mm Diameter
• Terp Pill: 5mm Diameter

30mm Terp Slurper Enail Coil:​

• Size: 30mm - Compatible with 30mm Diameter Bangers
• Coil Style: Axial Hybrid
• Coil Material: Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type
• 30 Day Warranty on Enail Coil

Universal Titanium Nail:

• Joint Size: 10mm 14mm 18mm
• Joint Gender: Male Female
• Joint Angle: Straight - Compatible with 90 Degree Joint Rigs
• Nail Diameter: 20mm
• Nail Depth: 4mm

Dual Size Enail Banger:

• Joint Size: 14mm and 18mm
• Joint Angle: 90 Degrees
• Joint Gender: Male
• Banger Bucket Diameter: 16mm
• Banger Bottom Diameter: 20mm
• Bottom Thickness: 2mm
• Neck Connection: Regular Weld
• Top Style: Flat Top

20mm Barrel Enail Coil:​

• Size: 20mm - Compatible with 20mm Diameter Bangers & Nails
• Coil Style: Barrel
• Coil Material: Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type
• 30 Day Warranty on Enail Coil

VapeBrat X2 Nectar Collector:

• Joint Size: 14mm
• Joint Gender: Female - Compatible with 14mm Male Nails
• Height: 6 Inches When Assembled
• Percolator: Dome Perc

14mm Titanium Nail:

• Joint Size: 14mm
• Joint Gender: Male
• Joint Angle: Straight - For Nectar Collectors
• Height: 3 Inches
• Material: Grade 2 Titanium

10mm Barrel Enail Coil:​

• Size: 10mm - Compatible with 14mm Titanium Nails
• Coil Style: Barrel
• Coil Material: Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type
• 30 Day Warranty on Enail Coil

Features:​

• Controller Box Low Energy Usage
• Can be Used with 250V 6 Amp Fuse - Fuse Protection
• Steady Temperature Control With Almost No Overshoot
• Controller Box Contains a PID Microprocessor
• Quick Heat Up
• ON/OFF Push Button for Box
• Terp Slurper with Marble Set Combination for More Evenly Heated Dabs
• 30mm Terp Slurper Enail Coil Style for Top Notch Heat Distribution
• Titanium Nail Universal Size and Gender
  • Can be Used with Male and Female Joint Rigs
  • Can be Used with 10mm, 14mm, and 18mm Joint Size Rigs
• Quartz Bucket with Flat Top with a Thick 2mm Bottom
  • Dual Size to Fit 14mm and 18mm Rigs
  • Extended Quartz Arm to Hold Enail Coil
• VapeBrat X2 Upgrade Kit
  • Upgrade Your VapeBrat Enail to An Electric Nectar Collector Enail
  • Precision Temperature Control for Nectar Collecting​

Includes:

• 1 x VapeBrat Micro Enail Controller with Digital Display
• 1 x VapeBrat Full Welded Enail Banger 14mm and 18mm Male 90 Degree Bucket Banger
• 1 x VapeBrat Fully Welded Terp Slurper 14mm Male 90 Degree Angle
• 1 x Marble Pill 3 Piece Set
• 1 x VapeBrat Universal Titanium Nail (Fits 10mm/14mm/18mm Male and Female)
• 1 x VapeBrat X2 Nectar Collector
• 1 x 14mm Titanium Nail
• 1 x 14mm to 18mm Female to Male Adapter
• 1 x Glass Angled Carb Cap
• 1 x Titanium Dab Tool Carb Cap
• 1 x 30mm Axial Hybrid Coil
• 1 x 20mm Barrel Coil
• 1 x 10mm Barrel Coil
• 1 x 6ft Long Power Cord
• 2 x Silicone Jars
• Travel Case Sold Separately
• Instruction & Troubleshooting Manual
• BONG NOT INCLUDED

Quick Tip:

Which Dab Rig is Best for my E-nail?

Recycler rigs are typically the best for enails and concentrates in general, offering maxing filtration with minimum cooling. With an e-nail, sturdiness and balance is key, this is why we have specifically chosen a few options to offer you that will be perfect for the e-nail being viewed.

Click Here to Read More About the Top Five Best Enail Dab Rigs!

Enail FAQ Beginners Guide - Click Here