VapeBrat LCD Enails: Quartz Banger E Nail - 35mm

VapeBrat LCD Enails: Quartz Banger E Nail - 35mm

The VapeBrat LCD 35mm Enail includes a VapeBrat Directional UFO Carb Cap can direct your airflow with a simple to operate handle, spin and twist the cap to get the nozzle to push air through the melted concentrates for a more evenly vaporized dab. This VapeBrat Directional UFO Carb Cap is made out of 100% borosilicate glass, and features a traditional ufo carb cap design with a single nozzle at the bottom.

35mm Axial Enail Coil, LCD E Nail Controller Box, Quartz Enail Banger, and Directional UFO Carb Cap

UFO Carb Caps create a perfect seal when placed onto a flat top. The extended handle contains an airflow hole which can be capped by your finger or left open for more air to flow through, resulting in more intense rips!

The UFO Carb Cap is paired with a massive 35mm Enail Banger which features a flat top to create a flush seal when its designated carb cap is placed on top, this seal actually helps create more pressure allowing for lower temperature dabs and smoother rips. This type of enail banger utilizes an 8mm o-clamp, meaning there is a short rod extended from the bottom of the banger an oclamp around it to fasten your enail coil in place. An o-clamp is the safest way to use an enail coil, these tiny clamps help to keep your coil secure and fitting snug so that it never gets loose or falls off potentially burning you or any materials below it.

Note: This E-Nail Banger is best used with a 35mm axial coil.

The VapeBrat LCD Enail Controller Box is able to achieve super high temps in a matter of seconds. The VapeBrat LCD features a customized PID for more accurate temperature readings with a less temperature fluctuation than the VapeBrat Micro. Temperature can be set anywhere from 0-1000 Degrees based on preference, even though you can run this thing to almost 1000 degrees, it's probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and the actual temperature of the coil or heated surface, giving the user that added accuracy needed to achieve that perfect dab every time. Just set this enail to your desired temp and dab on my fellow VapeBrat... dab on!

Lastly the VapeBrat Quartz Banger Enail Kit comes with a 35mm Enail Coil for optimal heat transfer to the entire bottom surface area as well as the side walls of the enail banger. This coil design covers a majority of the banger to minimize pooling and waste. The Axial Coil is made out of Nickel Chromium Stainless Steel and a kevlar sheath. Nickel and Chromium also known as NiChrome has the ability to heat up to higher temperatures however it has more resistance. Since this metal has more resistance towards electrical current, it heats up more slowly than other metals. NiChrome is known to withstand high temperatures without oxidizing, being damaged, or warping. It is also non corrosive!

Specifications:

LCD PID Controller Box:

• Temperature Range: 0°F to 1000°F
• Size: 4.7" x 3" x 1.6"
• Display: LCD Digital - Set Value and Coil Temp - Touch Screen
• Input: 110V - 250V
• Coil Connection: 5PIN Female XLR
• Pin Set Up: PIN 1: TC+, PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC

NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.

Quartz Bucket Enail Banger:​

• Joint Size: 14mm
• Joint Angle: 90 Degree
• Joint Gender: Male
• Banger Bucket Inner Diameter: 31mm
• Banger Bottom Diameter: 35mm
• Neck Connection: Regular Weld
• Top Style: Flat

Note:You can change the Gender and Angle to fit your dab rig by choosing a different selection from the options menu on the right of the product page.

Directional UFO Carb Cap:

• Height: 32mm
• Diameter: 36mm
• Insertable Diameter: 17mm

35mm Axial Enail Coil:​

• Size: 35mm - Compatible with 35mm Diameter Bangers
• Coil Style: Axial - 5 Wraps
• Coil Material: Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type

Features:​

• Controller Box Low Energy Usage
• Can be Used with 250V 6 Amp Fuse - Fuse Protection
• Steady Temperature Control With No Overshoot
• Quick Heat Up
• ON/OFF Touch Button for Box
• 35mm Banger with Axial Coil for Maximum Heat Distribution
• Directional UFO Carb Cap for More Evenly Vaporized Dabs

Includes:

• 1 x VapeBrat LCD Enail Controller Box with LCD Display
• 1 x VapeBrat Regular Weld Quartz Banger: 14mm Male 90 Degree
• 1 x VapeBrat Directional UFO Carb Cap
• 1 x O-Clamp
• 1 x 5ft 35mm Axial Enail Heater Coil
• 1 x 6ft Long Power Cord
• 2 x Silicone Jars
• Travel Case Sold Separately
• Instruction & Troubleshooting Manual
• BONG NOT INCLUDED

Quick Tip:

Having the right banger can make a world of difference to your dabbing experience, these items that warrant a bit of a splurge to make sure your experience is as elevated as can be.

#5. Banger Accessories

Carb Caps: There are just as many different types of carb caps as there are bangers, but there are two things to concern yourself with, the carb cap size, and style / functionality. The most popular carb caps have an airflow design that allows for your concentrates to evenly distribute in the banger, preventing pooling, and allowing the concentrated to evenly vaporize. When choosing inserts, such as terp pearls, getting a vortex carb cap or directional carb cap is crucial in making the pearls function properly.

To Read The Ultimate Bucket Banger Buying Guide Click Here!