Greenlight Vapes - Mini V2 Enail Quartz Banger Bucket Kit

Greenlight Vapes - Mini V2 Enail Quartz Banger Bucket Kit 

The best solution for heating quartz banger or titanium nails with an eNail coil. This revolutionary coil design heats the bottom of the nail in addition to the sides for the most even heating possible.

Specifications:

• Plug Type : 120V USA
• Power Cable Length : 6ft
• Coil Cable Length : 5ft
• Controller Dimensions : 3.5" x 5" x 1.5"
• Box Material : Metal
• Temperature Range: 0°F - 1290°F
• Display: LED Panel
• Charging: Power Adapter
• Coil: 25mm​
•  14mm Male 90 Degree Banger - 25mm Diameter with a Bubble Carb Cap

Features:

• Simple Enail box with precision temp control to +/-4℉.
• Has a plug-and-play smart PID controller.
• Professionally built with XMT-7100 PID and tuned, this is for controlling the hot runner coil heater.
• Will heat from room temperature to max 700°F within 1 to 2 minutes. 
• Almost no temperature overshoot.

​Includes:

• 1 x Green Light Vapes Mini Enail V2
• 1 x Heat Coil/25mm
• 1 x Power Cable
• 1 x Quartz Banger/25mm
• 1 x Quartz Carb Cap
• 1 x User Manual
• 1 x Packaging

Desktop and Portable Options Available

Enails come in two categories: desktop and portable. Desktop enails may be battery-powered or plug into an outlet, and they are larger in size, usually having a wider array of output capabilities. Meanwhile, portable enails have lower battery capacities, but the tradeoff is that you can take them with you easily wherever you go.

Offer Precise Temperature Control

Yes, temperature is the most crucial component of dabbing. The temperature that your dabs reach determines the potency, amount of flavor and vapor that you experience, as each compound in your concentrate has a specific boiling point at which its properties are activated. A huge benefit of using an enail is that you can set the exact temperature that you prefer and know that each and every puff of vapor will therefore be identical to the last.

Different E-Nail Coil Sizes and What they Do?

The e-nail coil size determines the size of the banger or nail that will be able to be used with it.

Consequently, the diameter of the banger, will impact the surface area available for vaporizing. Impacting the amount of concentrate able to be efficiently used at a time. For example, if using a 16mm banger with a 16mm enail coil at 450 degrees temp vs. using a 35mm banger with a 35mm enail coil at 450 degrees temp. You can put two - three times more concentrate in a 35mm than you would a 16mm while keeping the same vaporization rate and minimal pooling.

The coil size and heat able surface area of the banger or nail will determine the vaporization rate and amount of concentrates you can vaporize at one time.

Difference in Joint Sizes 10/14/18mm

There are a few specifications you can garner from a pipes joint size…

• 10mm - Typically, when you are using a 10mm joint you will be working with a smaller pipe with less water filtration and airflow. These are predominately used for concentrates to enable smaller smoother inhales.
•  14mm -The 14mm joint sizes are the most common, they are typically found in a range of heights and percolator set ups, while offering more water filtration options than smaller 10mm pipes.
• 18mm-19mm - This joint size (18mm) is traditionally reserved for those with “lifeguard lungs”, who can consume larger inhales, the pipes are typically much larger in size sometimes up to 6 ft. while offering the most water filtration.

To put it simply it’s the straw concept. Think of using any coffee straw verses using a large milkshake straw, soda straw. With one you can inhale a large amount the other would be more constricted. Some people would prefer the more constraint straw e.g. the “coffee straw” (10mm).

Compatible with :

• Bangers : 14mm Male 90 Degree 25mm Diameter Banger
• Pipes: 14mm Female Joint Bong or Rig

Quick Tip

Hot temp Vs Low Temp – Just because you can take these devices upwards of 900 degrees doesn’t mean you would want to nor is it advised. Many dabbers have a “sweet spot”, referring to the temperature at which the flavor, potency and vapor quality are all completely in line with the user’s preferences. Each dabber’s sweet spot is unique based on what it is that they want out of their dabbing experience. Using a torch to heat your nail means that finding your sweet spot can be a hit or miss, as it’s hard to memorize exactly how you applied the torch to get that quality experience. With an enail, you can keep the setting that you like so that you always find that sweet spot with each pull of vapor that you take.

To Read More about High Temp Vs Low Temp Dabbing Click Here!