Atman Electric E-nail Dab Temperature Control Box 2in1

The Atman e-nail is the best priced enail and a must have upgrade for vaporizing your essential oils. It will enhance your vaping experience allowing you to accurately control the temperature of each dab. No more Butane or thinking you have the right temperature. No more torches hence no more scorch marks. E nails eliminate butane residue that heating with torches causes. This coil heats up in just a couple minutes you will be dabbing away and having a great time with your new device. Well NEVER again when you with our enails. Enails are the future… fast, clean, reliable hot nail when you want, all at the flip of a switch, never run out of gas when you want to get medicated.

Simpler, safer, smarter

• Atman Electric E-nail with Case (TEMP BOX INCORPORATED)
• Standard sizes available with various cross section
• Various Watt Density options available.
• Robust Design with Choice of Terminal Exits
• Available with built in Thermocouple
• Designed for even heat profile.
• Precision fit on Hot Runner Nozzles & Manifolds.
• Highly Non-corrosive.
• Maximum heat transfer due to more contact area.
• Advanced Thermal Engineering.​

Contents​

• Sheath Material: Cr Ni-Steel
• Insulation Material: MgO
• Resistance Wire: Ni Cr 80-20
• Heating Coil Diamater: 16mm/20mm
• Temperature Range: 200-700° F
• Thermocouple: J Type or K Type
• Padded Briefcase
• 5.5ft Power Cord

Desktop E-nails are by far the most powerful, efficient, customizable and controlled dabbing experience. Whether you enjoy hot dabs, low temp dabs, or something in the middle, you can find the exact temp you are looking for with a desktop e-nail. No matter what type of pipe you have, 45 degree angle, 90 degree angle, 14mm male, 10mm, female 19mm male and the list goes on, there is a desktop e-nail that will fit your pipe! Desktop plug-in E-nails allow for efficiently consume your concentrates without burn or waste. Need to have a long sesh with friends, get yourself an e-nail. Want to travel and not worry about butane? Grab yourself an e-nail. Rather not deal with the whole torch situation? Desktop plug-in e-nails are the only type of e-nail that can rival the torch experience. Up your game and grab one today! As an alternative to an E-nail some people have been choosing temp readers to understand the bangers exact temperature.

Difference in Joint Sizes 10/14/18mm

There are a few specifications you can garner from a pipes joint size…

• 10mm - Typically, when you are using a 10mm joint you will be working with a smaller pipe with less water filtration and airflow. These are predominately used for concentrates to enable smaller smoother inhales.
•  14mm -The 14mm joint sizes are the most common, they are typically found in a range of heights and percolator set ups, while offering more water filtration options than smaller 10mm pipes.
• 18mm-19mm - This joint size (18mm) is traditionally reserved for those with “lifeguard lungs”, who can consume larger inhales, the pipes are typically much larger in size sometimes up to 6 ft. while offering the most water filtration.

To put it simply it’s the straw concept. Think of using any coffee straw verses using a large milkshake straw, soda straw. With one you can inhale a large amount the other would be more constricted. Some people would prefer the more constraint straw e.g. the “coffee straw” (10mm).

Quick Tip

Why should I choose a Desktop E-nail?

Desktop e-nails are best for those looking for the ultimate rig experience. With specific temp control you are able to fine tune the heat settings to perfectly match your desired temperature. Just because you can take these devices upwards of 900 degrees doesn’t mean you would want to nor is it advised. Many dabbers have a “sweet spot”, referring to the temperature at which the flavor, potency and vapor quality are all completely in line with the user’s preferences. Desktop Enails are the most efficient way to consume concentrates by allowing you the ability to find the perfect temperature for your specific concentrate. 

Read about the Top 5 ENails of 2021!

Why Should I Buy an Enail?

An Enail offers the most powerful, precise , effective and efficient dabbing experience possible! Click Here to Read More

What is the Best E-Nail?

There are many different types of enails, between analog, digital, portable, or choosing between the options like hybrid, quartz, titanium, ceramic, different sizes and different brands like High Five, Galaxy, or VapeBrat, the options may seem a little overwhelming. It is best to choose an Enail set up that is most suitable to your wants, needs, and preferences! Click Here to Read More

Which Dab Rig is Best for my E-nail?

Recycler rigs are typically the best for enails and concentrates in general, offering maxing filtration with minimum cooling. With an e-nail, sturdiness and balance is key, this is why we have specifically chosen a few options to offer you that will be perfect for the e-nail being viewed. Click Here to Read More

What difference does the coil size make?

The coil size determines the banger size which is based upon the typical dab size. Is using a Reclaim Catcher a good idea? Reclaim Catchers pay for themselves within the first few usages by keeping the pipe clean while saving some reclaim for later. Click Here to Read More

What temperature should I set my enail to?

The recommended temperature ranges between 450-650 depending upon your preferences. Click here to Read More

How to Dab with and Use an E-Nail?

• Plug in all of the parts, connect the nail/banger and rig
• The controller box can now be turned on, most enail controller boxes will have a switch or a button to turn it on and off. (If you see an error code on the display screen after the controller box is turned on and the COIL IS CONNECTED PROPERLY, this may indicate that there is a problem with the coil’s thermocouple. This does NOT mean the unit is faulty.)
• Set the controller box to your desired temperature.(We recommend running your enail controller between 450 and 650 degrees Fahrenheit, running an enail controller higher or lower will result in a less than satisfactory experience while running the risk of damaging the banger.)
• Once the banger/nail is to your desired temperature (usually takes about 30 seconds to heat), pick up the desired amount of concentrates with the tip of a dab tool.
• Place the concentrates on the bottom of the heated surface with the dab tool. (Utilizing the appropriate amount of concentrates based on the size and temperature of the banger or nail, will maximize the cloud size)
• Inhale through the dab rig mouthpiece.

Click Here to Read a More Detailed Explanation of How to Setup and Use an Enail.

Enail FAQ Beginners Guide - Click Here

If your device is still not working correctly, please send an email to info@e-nail.com, stating the specific problem. Please include a picture or video showing the fault and also include your order number.