VLAB Halo Smart ERig Electric Dab Rig Black Device

Halo Smart ERig Electric Dab Rig from VLAB 

The Halo Portable Smart Dab E-Rig offers three temperature settings (480F, 600F, and 750F) that are perfectly calibrated to bring out the most valuable active ingredients in your concentrates. Whether you prefer smaller or larger dabs, or different forms of wax, the VLab Halo Electric Dab Rig supplies you with an ideal temperature setting for any session.

NiChrome Coil Atomizer

The Halo also features a nichrome coil, which acts similarly to the popular kanthal coil, however nichrome heats up faster and has more resistance. Nichrome is composed of Nickel and Chromium. The reason why this metal is used in coils is because of its high melting point, which means that this metal is unlikely to melt when exposed to high heat and it also has a low conductivity rate. So when you are switching to a higher temperature settings it'll raise the temperature slowly, giving you the most out of your flavorful hits!

Ceramic & Quartz Inserts

The Halo ERig Kit comes with two inserts, one insert is ceramic and the other is quartz. The ceramic and quartz inserts efficiently extract the most beneficial active ingredients in your wax concentrates, while still delivering smooth, tasty, and full bodied clouds. 

Top AirFlow Top Performance 

The Halo Smart Rig’s Borosilicate Glass Top is hand blown and has a large opening at the bottom giving you optimal airflow, unlike other competitors on the market. The Halo Glass Attachment also features 8 holes of percolation to filter each inhale of vapor ensuring that each hit is smooth without any harshness and without any debris. The Halo Glass Top is also compatible with the Focus V Carta Base.

30 Second Sesh Mode, Haptic Feedback, & Other 

The Halo features a 30 Second Sesh Mode option that is a must whether you use it for your solo sessions or with a friend. As soon as your erig is pre heated it will vibrate (Haptic Feedback) letting you know it is at your desired temperature and ready to go! The Halo has a 3600mAh battery which gets you about 45 uses per charge, if your erig dies on you just plug it up to the USB-C charger for lightening fast charging (One hour for full charge). Designed with a slim and sleek figure and intuitive operation, this unit makes your dabbing a simple and comfortable experience. 

Specifications:

• Height : 6.75"
• Battery Size : 3600mmAh
• USB Type C Charging
• Nichrome Coil
• Developed & Designed in USA
• Three Temperature Settings (480F, 600F, 750F)

Features:

• 15 Seconds Heat Up Time
• 30 Seconds Sesh Mode
• 2 Minutes Auto-shutoff Protection
• Haptic Vibration Technology
• Durable Coil Atomizer
• Coil-less Quartz & Ceramic Atomizer Cups
• Hand Made Borosilicate Glass
• 8 Holes of Percolation
• Glass Attachment Interchangeable with Carta Base
• Powerful Battery Supporting 35 Cycles 

Dabbing at a low temperature is usually between 300 and 450 degrees. Anything below 300 will not vaporize the concentrates hot enough for you to experience anything. Most dabbers prefer low temp dabs and the qualities it provides compared to high temp dabs. Low temp dabs provide the perfect balance between potency and flavor while minimizing any harshness to your lungs or throat, allowing you to enjoy your concentrates longer.

Benefits of Low Temp Dabs

• More flavor: Because the terpenes are vaporized at their preferred temperature, their properties will be fully active, providing you with a full flavor profile.
• Easier to consume: Because low temperature dabs are less harsh on your lungs and throat, the overall dabbing experience is more pleasant.
• Longer lasting: The lower the temp, the longer it takes for your concentrates to vaporize away, allowing you to save money.

How to Use VLAB Halo Electric Dab Rig

• 1. Fully charge the device before first use, when the power button is illuminated red the battery is charged under 30%, the light will then illuminate white after it is charged over 60%, once charging is completed the Halo will vibrate and the light will turn off. The Halo base should be fully charged in one hour.
• 2. Fill the glass bubbler with water just above the holes in the percolator, do not fill the glass attachment while it is attached to the VLAB Halo base.
• 3. Align the inlet hole on the front of the glass attachment with the hole on the base leading to the atomizer. Carefully place the glass attachment into the base.
• 4. Power on the device by clicking the power button five times fast. Once the Halo is turned on the power button will flash three times.
• 5. Click the power button three times to toggle through the heat settings:
• Green Light – 480 Degrees
• Blue Light – 600Degrees
• Red Light – 750 Degrees
• —The V1 has three temperature settings and the V2 has 4 temperature settings, the temperature settings may vary based on which version of the Halo you purchased.
• 6. Use loading tool to place concentrates on the bottom surface of the quartz bucket located inside the atomizer. Make sure the concentrates are placed at the bottom of the quartz bucket and not the walls.
• 7. Place carb cap on top of the atomizer.
• 8. Hold the power button down for two seconds to initiate heat up, the device will then vibrate and the led band light around the base will flash the color of the selected temperature setting.
• 9. Once the Halo is heated to selected temperature, it will continue to maintain heat for 30 seconds.
• 10. After the heating cycle is finished the device will vibrate and the lights will turn off.
• 11. Use a cotton swab to clean the quartz bucket after each use.

How Do I Power Off My VLAB Halo Electric Dab Rig?

• Click the power button twice to turn the device off, after a heating cycle the Halo will go into standby mode. This device will power off automatically after two minutes of inactivity to preserve battery life.

Why is My Halo Electric Dab Rig Blinking Three Times?

This indicates that there is a connection issue, please try the following steps:

• Please unscrew the atomizer and make sure it is screwed in correctly, sometimes the atomizer will not make a clear connection with the firing pin on the base if the threading is off when the atomizer is screwed in.
• If the Halo continues to blink three times, this may be due to a firing pin issue. There is a firing pin on the base and there is also a firing pin at the bottom of the atomizer.
• There is a firing pin on the base and there is also a firing pin at the bottom of the atomizer.
• Unscrew the atomizer, using a dab tool gently lift the firing pin slightly.
• DO NOT lift the firing pin all the way out, this will cause the wiring to disconnect, and the atomizer will stop working completely.
• Very slight lifting of the firing pin will help the atomizer to make a connection with the base and your Halo should start working properly again from there.
• If neither of the above steps resolve the issue, we suggest replacing the atomizer.

Why is My Halo Electric Dab Rig Blinking Five Times?

This indicates that there is a short circuit, or low battery.

• If the Halo base has come into contact with water, allow for the base to dry out completely and then try turning the device on again.
• If the device is dead, please place the device on the charger and allow the Halo to fully charge before attempting to use it again.

Why isn’t My Halo Electric Dab Rig Charging?

• If you place the Halo base on the charger and the light does not illuminate, this may mean the device is already fully charged.
• If the device is not fully charged and the power button light is still not illuminating when placed on the charger, please try a different charging chord, charging block, or a different outlet.
• You should always charge your devices through a direct outlet and not a power strip.

How Do I Clean the Halo Glass Attachment?

• Remove the glass attachment from the Halo base.
• Soak the glass attachment for one hour, either in isopropyl alcohol or in a glass cleaner of your choice.
• Rinse with water and let air dry fully before reassembling.

How Do I Clean the Halo Atomizer?

• Unscrew the atomizer from the Halo base by turning it counterclockwise.
• Remove the quartz bucket insert from the atomizer.
• Soak all parts in isopropyl alcohol for one hour.

—If the quartz bucket insert is stuck inside the atomizer do not attempt to pull it out, soak it in isopropyl alcohol to loosen up the built-up residue and then attempt to remove it from the atomizer.

Warning:

• Make sure the atomizer is fully cool to the touch before unscrewing it.
• Be sure the device is powered off before cleaning.
• After cleaning allow for all parts to dry completely before reassembling.
• Do not blow into glass attachment while it is filled with water and is attached to the base.
• Do not overfill the glass attachment with water.
• Wait at least one minute between heating cycles.
• Do not store this device while the glass attachment is filled with water.
• Keep away from high humidity and moisture, it is best to store the Halo E-Rig in a dry dark place when not in use.
• Do not overfill the atomizer, this will cause the atomizer to flood resulting in the need of a new atomizer.

If your device is still not working correctly, please send an email to info@e-nail.com, stating the specific problem. Please include a picture or video showing the fault and also include your order number.