Lookah Seahorse 2.0 E-Nectar Collector Neon Green

Lookah Seahorse 2.0 Wax Dab Pen Electric Nectar Collector

Lookah has just launched this brand new Electric Nectar Collector for 2021 called the Lookah Seahorse 2.0. Now I know you might be thinking that the Lookah Seahorse 2.0 looks almost identical to the original Lookah Seahorse, however they have made quite a few changes making the 2.0 more powerful, tasty, and an absolutely must have!

How did they make the Seahorse 2.0 so much tastier and powerful than the Seahorse and Seahorse Pro? It's all in the Tip!

The Number #1 Electric Nectar Collector for the past 4 years running has and continues to be the Huni Badger. It’s power combined with it’s taste offers the ultimate on the go dabbing experience. The Huni Badger tip has been its secret sauce, which is now beginning to be duplicated by other manufacturers and put on to the less expensive models, such as the Seahorse 2.0 and the Rokin Stinger. You will see more devices adopt this technology over the next few months.

If you take a closer look you'll see that the Coil paired with this device is now a straw-like Ceramic Tube Coil Tip, it has numerous layers of ceramic encircling the heating element which ensures the smoothest and most evenly vaporized dab. The ceramic layers also mitigate the chance of burning through your wax when edging the device into your concentrates. The Lookah Seahorse 2.0 Tip is now more durable and easier to use, however this device is also compatible with the Seahorse Pro Quartz Coil, Seahorse Pro Ceramic Coil, and 510 Cartridges!

Like the original Lookah Seahorse, this e-nectar collector has a manual and automatic mode, both of which can operate in three temperature settings. The three temperature settings on the Seahorse 2.0 range from 710 degrees, 790 degrees, all the way up to 840 degrees, which makes certain you'll be getting way bigger and thicker clouds compared to the original Seahorse and Seahorse Pro. The well known and loved 30 second sesh mode also carried over to the Seahorse 2.0, giving you consistent heat to your tip for 30 seconds so you can continue to dab without preheating your coil over again!

The Seahorse 2.0 features an improved air path and easily comes apart to make cleaning hassle free. For cleaning, all you would do is remove the coil, the screw on magnet, the 510 thread top, and mouth piece to find the air path. The air path runs directly from along side of the 510 thread connector all the way through to the top of the device, just dip the cleaning brush in some isopropyl alcohol or a cleaning solution and pass it through the air passage to remove any build up or residue left behind.

The Lookah Seahorse 2.0 Mouthpiece is held in place by a magnetic connection and so is the Tip Cap, the tip cap covers your coil when your device is not in use so that the tip is always protected incase of a drop. The Cap also stops your Seahorse 2.0 Coil from getting any lint or debris stuck inside of it while you are on the go, it is made of plastic so it is recommended you let your device cool before placing the cap back on to avoid melting.

With a reversible USB Type-C port for charging, you won't have to worry about jamming the cable in the wrong way and possibly damaging the port. No matter how blazed you get, charging your Lookah Seahorse 2.0 is absolutely foolproof. The upgraded USB-C charging capabilities to the Seahorse 2.0 allows your device to charge super fast so you can get back to your sesh without missing a beat.

This versatile Electric Nectar Collector Dab Pen can be used with your water pipe as a portable e-nail, simply add some concentrate to the tip, insert the device mouthpiece first into your water pipe paired with the silicone adapters (sold separately), and heat the tip by pressing the button to vape. This method can also be used with a 510 thread cartridges as well.

Specifications:

• Height: 6 Inches
• Battery: 650mah
• 15 Second Heat Up Time
• Compatible with 510 cartridges
• Type-C Charging Port
• Ceramic Tube Coil Tip
• Three Temperature Settings

Features:

• Portable and Compatible with Bongs & Rigs when Paired with Adapters or Silicone Hose
• Redesigned Airflow & Air Path
• Unique Magnetic Mouthpiece & Tip Cap
• 30 Second Sesh Mode
• Pre-Heat Function
• Updated Durable Coil Tip

The Seahorse 2.0 Electric Nectar Collector Kit Includes:

• 1x Seahorse 2.0
• 1x Magnetic Tip Cover
• 1x Seahorse Coil type III
• 1x Cleaning Brush
• 1x USB- C Cable

Compatible With :

• Lookah Seahorse Dual Ceramic Coil
• Lookah Seahorse Replacement Coil 1.2 Ohm Quartz Coil
• Lookah Seahorse 2.0 Coil Ceramic Tube Coil
• Lookah Quartz-Taste Wax Tank One Cart + Four Different Coils
• Lookah Seahorse Pro Green Short Hose 12 Inches 14mm 18mm Adapter
• Lookah Seahorse Protective Travel Leather Zipper Case
• 14mm and 18mm Water Pipes (must have adapters)

Quick Tip:​

Maintaining a Nectar Collector

Once you’ve gotten the hang of operating a nectar collector, whether it be electric or manual, you’ll need to maintain it. Ultimately, cleaning it after each use will keep the actual cleaning process simple, fast, and efficient, but if you can’t do that, try to clean it after each third or fourth use.

Cleaning an e-nectar collector is rather straightforward via two methods:

• Over-saturating the coil will decrease the coils vaporization rate (decreasing the cloud size). It is always recommended to slightly touch the edge of the concentrates with the coil tip, never dipping it into concentrate.
• Ideally after each session you may want to run a cleaning cycle, this will prevent gunking of your coil while increasing the lifespan and taste. A cleaning cycle (a frequent clean method) is done by running your device to its max temperature until there is no vapor rising from the coil, meaning there are no excess concentrate remaining on it or in it.
• To clean your e-nectar collector, soak a long cotton swab in our Formula 710 Cleaning Solution or any other cleaning solution then clean the airway of your device to remove any remaining reclaim.

Proper Storage of your nectar collector will elongate your products lifespan. Some coils and devices are more fragile than others, keeping your device in a safe case is recommended. So, find a safe spot to store your nectar collector where it will not risk breaking.

Read more about The Best E-Nectar Collectors of 2022 by Clicking Here!

Button Stopped Working

Please try the following steps:

• 1. Please check if the button can be pressed. It should click when pressed.
• 2. Press the power button 5 times in quick succession to turn on/off the device. The indicator light should flash white 3 times after.
• 3. If the indicator light did not flash, please try charging the device.
• 4. When connected to the USB charging cable, the LED light should be red to indicate charging.
• 5. After charging, Press the power button 5 times to turn on the device, then press and hold the power button and test if the coil gets hot.

Flashing Yellow Light - 5 Times

If the indicator light flashes yellow 5 times when you press the power button then this may indicate an open circuit problem. Sometimes this can happen if the tip or cartridge isn't screwed on correctly or if it is screwed on too tight.

Please try the following steps:

• 1. Unscrew (anticlockwise) and take off the coil, use a Q-tip and some alcohol cleaner to clean any dirt or residue on the 510 thread end of the coil and the 510 thread hole of the seahorse 2.0.
• 2. Replace the coil by screwing it (clockwise) into the threaded hole.
• 3. Turn on the device and test it to see if this resolves the issue.
• 4. If the indicator light still flashes yellow, please try another new coil.
• 5. When cleaning the Seahorse 2.0 be careful not to unscrew the inset screw at the center of the 510 threaded section where the tip/coil attaches to.

If this screw is not securely in place, the vape will register a circuit error when the power button is pressed. Please ensure this screw is tight and secure after cleaning.

Flashing Yellow Light - 10 Times

If the indicator light flashes yellow 10 times when you press the power button then this may indicate an open circuit problem.

Please try the following steps:

• 1. Unscrew (anticlockwise) and take off the coil, use a Q-tip and some alcohol cleaner to clean any dirt or residue on the 510 thread end of the coil and the 510 thread hole of the seahorse 2.0.
• 2. Replace the coil by screwing it (clockwise) into the threaded hole.
• 3. Turn on the device and test it to see if this resolves the issue.
• 4. If the indicator light still flashes yellow, please try another new coil.
• 5. When cleaning the Seahorse 2.0 be careful not to unscrew the inset screw at the center of the 510 threaded section where the tip/coil attaches to.

If this screw is not securely in place, the vape will register a circuit error when the power button is pressed. Please ensure this screw is tight, and secure after cleaning.

Flashing Red Light

The red flashing light indicates low power / low battery.

Please try the following steps:

• 1. Please charge the device for about 2 hours, the LED indicator light sholuld illuminate red when charging.
• 2. Press the power button 5 times to turn the device off while charging.
• 3. After charging, click the button 5 times fast to turn on the device.

Flashing Blue Light

If the indicator light flashes blue when pressing the power button this indicates an overload problem.

• 1. Unscrew (anticlockwise) and take off the coil, use a Q-tip and some alcohol cleaner to clean any dirt or residue on the 510 thread end of the coil and the 510 thread hole of the seahorse 2.0.
• 2. If this screw is not securely in place, the vape will register a circuit error when the power button is pressed. Please ensure this screw is tight, and secure after cleaning.
• 3. Replace the coil by screwing it (clockwise) into the threaded hole.
• 4. Turn the device on and test to see if this resolves the issue.

Where Can I Get Replacement Seahorse 2.0 Accessories?

You can purchase accessories for the Seahorse 2.0 by clicking here: www.e-nail.com. We have replacement coils and hoses.

I Am Having A Problem With My Coil

The coil is a consumable good and will wear out over time, depending on how often it is used.

• To ensure the tips last as long as possible, make sure you fully burn all the concentrates off the tip after each dab.
• If you leave concentrates on the tip or inside the airways it will harden and possibly ruin or wear out the coil prematurely.
• Please do not insert the cleaning brush into the airway of the coil as this can damage it.
• If your coil is worn out or broken, please replace it with a new one.

How Do I Use My Seahorse 2.0 With A Cartridge?

• 1. To use a 510 cartridge with the Seahorse 2.0 please ensure you have turned off the Seahorse 2.0 first and the tip is not hot.
• 2. Unscrew the tip/coil and then screw on your 510 thread cartridge.
• 3. You can then turn the device on and vape from the mouthpiece pressing the button as you do so to vaporize the content of your cartridge.

How Do I Clean My Seahorse 2.0?

Cleaning Steps:

• 1. Remove the heating tip/coil.
• 2. Unscrew the magnetic ring around the 510 the thread of the Seahorse 2.0.
• 3. Remove the collar around the thread exposing the airway.
• 4. Remove the magnetic mouthpiece.
• 5. Dip the cleaning brush or a pipe cleaner in a little isopropyl alcohol then insert into the air path and twist to remove the residue in the Seahorse pro. Repeat the method again with a little warm water.
• 6. Use the cleaning brush or a q-tip to clean around the thread and mouthpiece on the Seahorse 2.0.
• 7. Ensure the parts are dry and then put back together.

My Seahorse 2.0 Is Not Charging

Please try the following steps:

• 1. See if the indicator light is flashing, take note of what color light.
• 2. Please check if there is any damage or noticeable issues with the charging port or USB cable.
• 3. If the charging port is dirty, clean with an alcohol soaked cotton swab.
• 4. Try an alternative USB charging cable, or a different charging block, or a different outlet.

If your device is still not working correctly, please send an email to info@e-nail.com, stating the specific problem. Please include a picture or video showing the fault and also include your order number.