VapeBrat Mini Micro Enail Dab Kit: 25mm Vortex Banger Enail

VapeBrat Mini Micro Enail Dab Kit 25mm Vortex Banger E-Nail

Love the Desktop E-Nail experience but.. rather something more.. portable? Check out the new Mini Micro Vortex Banger E-Nail by VapeBrat!

This small yet mighty Mini Enail is super portable, a controller box that's just big enough to fit in your pocket! Measuring in at 2.87" x 1.29" x 4.72", we think this is the miniest Micro we've ever seen! The Mini Micro Enail is paired with the VapeBrat 14mm Male 90 Degree Vortex Enail Banger, which has a bottom diameter measuring in at 25mm.

The Vortex E-Nail Banger by VapeBrat features the same directional air pathways build into the side walls like a regular vortex banger, however this banger has a quartz rod sticking out from the bottom to secure your enail coil in place with an o-clamp. This safe and simple variation for a coil holder reduces the risk of the coil falling off and potentially burning you or anything under it.

The Vortex E-Banger also features a beveled top to create an airtight seal for a marble carb cap, increasing the airflow through the directional airpaths creating a spinning effect that vortex bangers are known for. The overall construction is standard for a vortex banger, but what sets this enail banger apart is the fact that it is fully welded for increased durability making it less likely to break where the two pieces of quartz are normally joined together.

Vortex Bangers are best paired with terp pearls and a marble cap, when the top of the banger is sealed off by the marble cap, airflow is directed through the holes built into the walls. The increased airflow then spins the terp pearls around the heated bottom, liberating the terps, preventing hot spots, and pooling, producing a more evenly heated dab. When used without terp pearls the vortex airflow moves and spreads around the concentrates evenly throughout the heated surface area.

The Vortex E-Banger is the perfect companion to the 25mm E-Nail Mini Coil included with this kit. If you already have a 25mm standard coil youd like to use, you would need to purchase a Mini Enail Adapter. The Mini Micro controller box is compatible with Mini enail coils ONLY, you can use either a Mini Flat Coil or a Mini 25mm Coil with the Vortex E-Banger included. Vortex Banger accessories are NOT included, and can be purchased separately here :

• Terp pearls
• Bucket inserts (22mm and smaller)
• Carb Caps: (23-25mm)
  
  • Classic
  • Bubble
  • Directional airflow
  • Marble
  • Vortex

Specifications:

• Temperature Range: 0 Degrees F to 999 Degrees F
• Temperature Stability: 5-7 Degrees Depending on Environment
• Plug Type: 250V USA
• Power Cord Length: 6ft
• Controller Dimensions: 2.87" x 1.29" x 4.72"
• Box Material: Metal
• Coil Connection: Mini 5PIN Female XLR

Coil Specifications:

• Coil Size: 25mm
• Coil Shape: Barrel Coil
• Coil Length: 5ft

Banger Specifications:

• Joint Size: 14mm
• Joint Angle: 90 Degree
• Joint Gender: Male
• Banger Bucket Diameter: 23mm
• Banger Bottom Diameter: 25mm
• Banger Style: Fully Weld Vortex E-Banger

Features:

• Compact Portable Size
• Quick Heat Up with Steady Temperature Control
• On/Off Switch
• Grounded/Fuse Protected
• Last Set Temperature Memory

Includes:

• 1 x Mini Micro E-Nail Controller Box with Digital Display
• 1 x VapeBrat Fully Weld Vortex E-Banger 14mm Male 90 Degree
• 1 x 25mm Mini Barrel E-Nail Coil
• 1 x Silicone Jar
• 1 x 6ft Power Cord

Compatible with:

• Bangers :14mm Male Banger 25mm Diameter
• Pipes: 14mm Female Joint Bong or Rig

Quick Tip:​

Different E-Nail Coil Sizes and What they Do?

The e-nail coil size determines the size of the banger or nail that will be able to be used with it.

Consequently, the diameter of the banger will impact the surface area available for vaporizing. Impacting the amount of concentrate able to be efficiently used at a time. For example, if using a 16mm banger with a 16mm enail coil at 450 degrees temp vs. using a 35mm banger with a 35mm enail coil at 450 degrees temp. You can put two - three times more concentrate in a 35mm than you would a 16mm while keeping the same vaporization rate and minimal pooling.

The coil size and heat-able surface area of the banger or nail will determine the vaporization rate and amount of concentrates you can vaporize at one time.

Difference in Joint Sizes 10/14/18mm

There are a few specifications you can garner from a pipes joint size..

• 10mm - Typically, when you are using a 10mm joint you will be working with a smaller pipe with less water filtration and airflow. These are predominately used for concentrates to enable smaller smoother inhales.
• 14mm -The 14mm joint sizes are the most common, they are typically found in a range of heights and percolator set ups, while offering more water filtration options than smaller 10mm pipes.
• 18mm-19mm - This joint size (18mm) is traditionally reserved for those with "lifeguard lungs", who can consume larger inhales, the pipes are typically much larger in size sometimes up to 6 ft. while offering the most water filtration.

To put it simply it’s the straw concept. Think of using any coffee straw verses using a large milkshake straw, soda straw. With one you can inhale a large amount the other would be more constricted. Some people would prefer the more constrained straw e.g. the "coffee straw" (10mm).

Bucket Banger Buying Guide

Having the right banger can make a world of difference to your dabbing experience.

#4. Banger Thickness

There are 2 different measurements for thickness, there is the wall thickness and then there is the bottom thickness. The thicker the bottom and walls, the greater the heat retention and overall durability of the banger. Thickness does come at a cost. Using an extremely thick bottom banger will take longer to heat, however it will retain the heat longer. This would be important for those looking to maintain banger temperature while placing large amounts of concentrates into the bucket banger.

Read The Ultimate Bucket Banger Buying Guide!