Pulsar RoK: Electric Dab Rig - Matte Black

Pulsar RoK Electric Dab Rig Wax and Dry Herb Electric Dab Rig

Feast your eyes on Pulsar's latest and greatest electric dab rig, called the RoK! The Pulsar RoK is where functionality meets performance and enables yet another way to enjoy your concentrates and flower.

Yep, you heard that right, the RoK is a dual use electric dab rig, meaning it can be used to consume both concentrates and flower, talk about getting the biggest bang for your buck. This kit includes a ceramic atomizer insert to be used with dry materials, a quartz atomizer insert for wax, and two carb caps tailored to each atomizer (based on what material you're using). The RoK heats up to temperature in roughly 30 seconds, which helps to preserve flavor and clarity of your concentrates. A silicone band is located around the top of the atomizer for safe removal even if your RoK has just been used.

The RoK Electric Dab Rig stands about 7 Inches tall for increased portability, and is fully equipped with a large 1600mAh battery that should last you multiple sessions, charged through a Micro USB port. The body of the RoK is constructed of high quality Aluminum and is paired with a glass filtration base at the bottom. The RoK also features a mouth piece containing a silicone guard for increased comfort when inhaling and an isolated airpath for easy cleaning. The base of the RoK is made out of borosilicate glass and houses a showerhead disc percolator at the bottom to filter and cool your dabs before inhaling. The added benefit of having a glass water filtration attachment located on the bottom of your electric dab rig instead of the top is, you never have to worry about getting water on the the battery, potentially damaging the electric components of your erig causing it to fail prematurely. The RoK's design makes filling it with water completely effortless!

The RoK has three temperature settings ranging from 680 degrees all the way up to 850 degrees for super high temp dabs. There is also something called "30 Second RoK Mode", which is essentially what we refer to as a "sesh-mode", when activated the RoK will continuously maintain the preselected temperature for 30 seconds which allows you to take back to back dabs for the 30 seconds total!

Specifications:

• Height: 6.75 Inches
• Battery: 1600mAh
• Charge Type: Micro USB
• Temperature Settings: 3 Temperature Settings Ranging from 680-850 Degrees
• Aluminum Body with Glass Base
• Matte Black

Features:

• Isolated Airpath
• 30 Second RoK Mode - 30 Second Sesh Mode
• Dual Use Electric Dab Rig - Can be used with Dry and Wax
• Coilless Quartz & Ceramic Atomizer Cups
• New Updated V2 Quartz Atomizer Included
• Borosilicate Glass Bottom Fill Filtration Base
• Showerhead Percolator for Maximum Diffusion and Filtration
• 1 year limited warranty

Included:

• 1 x RoK Electric Dab Rig Body
• 1 x RoK Water Filtration Glass Base
• 1 x Quartz V2 Atomizer
• 1 x Ceramic Cup Atomizer
• 1 x Glass Carb Cap - Dry
• 1 x Bubble Carb Cap - Wax
• 1 x Tether (For Carb Caps)
• 1 x Dab Tool
• 1 x Micro USB Cable
• 2 x Wire Cleaning Brushes
• 2 x Silicone Atomizer Collars
• 4 x Crud Buds - Alcohol filled cotton buds

Quick Tip :

Good storage is key to ensuring that your handheld e-rig lasts for as long as possible. Ideally, store it away from humid areas of the home such as a bathroom, and make sure it's in a place where it won't easily get knocked over. Also, make sure that your e-rig is in a place where it won't get dirty or dusty, because those factors can most certainly interfere with the flavor, and even the performance if bits of debris get into the actual electronics.

Ideally, you will find a spot for it in a drawer and keep it in a box so that it doesn't rattle around, potentially getting damaged.

If you do end up unfortunately getting your erig dirty, always check out our selection of cleaners that will ensure the best and easiest cleanup that will be safe for you and your rig components.

Click Here to Read More About How to Keep Your Handheld E-Rig Working at its Absolute Best!

How To Use Pulsar Rok

• 1. Make sure your device is 100% charged before use, it’ll take approximately 2 hours for a complete charge. The RoK’s lights will pulse red when charging and illuminate green when the device is fully charged. Do not overcharge the battery, the Rok displays the battery life when turned on.
• Three Green Flashes = Full Charge
• Three Yellow Flashes = Medium Charge
• Three Red Flashes = Low Battery
• 2. Add water to the bottom glass beaker base on the Rok, it is recommended to fill the beaker halfway. You can remove some water based on preference, but do not fill it past the halfway point.
• 3. Attach the RoK disc perc downstem to the opening found between the two metal air path tubes. Insert with a slight twist motion and secure the perc flush inside the silicone housing. Do not use excessive force when affixing the perc to the unit.
• 4. Set the RoK beaker base filled with water onto a level surface. Gently place the RoK body onto the beaker base aligning the lip on the beaker base with the silicone track found at the bottom of the RoK body.
• 5. Once aligned, gently press down at a slight angle, simultaneously applying a rolling pressure to the RoK body so that the lip and track attach and lock into place. The fit should be snug and secure. Do not force or place high pressure onto the beaker base on this step.
• 6. Turn the device on by clicking the power button 5 times fast.
• 7. Toggle through the temperature settings by clicking the power button 3 times fast.
• Green Light – 680 Degrees
• Blue Light – 780 Degrees
• Red Light – 850 Degrees
• 8. Now that the temperature setting is selected, you can use a loading tool/ dab tool to place your desired amount of concentrates into the quartz bucket insert. Make sure to place the concentrates onto the bottom of the quartz bucket insert and not the side walls.
• 9. Press and hold the power button for 5-15 seconds to preheat the concentrates to your desired preference.
• 10. Place the carb cap on top of the atomizer.
• 11. Press and hold or “pulse” the power button to fire the RoK to your desired preference. The device will time out after the button is held for 30 seconds.

• For a more hands-free experience press the power button two times to activate session mode which will heat the device to the selected temperature and hold it for 30 seconds. To stop session mode after it’s been activated, simply click the button two times again.
• 12. There is a ceramic coil cup and a dry herb carb cap included in the RoK kit that is made to be used with dry materials. You can use this ceramic coil cup at the lowest heat setting to produce a dry herb vaporizer experience. The higher heat settings will produce more of a flower and waterpipe kind of experience.

How Do I Clean My Pulsar RoK Electric Dab Rig?

• For optimal use and flavor, use a cotton swab to clear out any left-over residue between sessions. After every few sessions it is recommended to clean the cups with cotton swabs soaked in isopropyl alcohol until clean to preserve the quality and lengthen the lifespan of your coil. Make sure the to wait until the coil has cooled down before cleaning. DO NOT submerge the entire atomizer in solution.
• To clean the glass components on the RoK start by removing the glass parts, clean with isopropyl alcohol and rinse with cold water. Be sure to allow all parts to dry completely before reassembling.
• To clean the metal pathways, remove the glass downstem and pull out both metal tubes out of the silicone housing and soak in isopropyl alcohol. Use a cleaning brush to remove and left-over residue after soaking. Once all residue is removed rinse with cold water and let air dry. To further clean the air path, disassemble the RoK collar and remove the coil, remove the mouthpiece and silicone splash protector. Dip a cleaning brush into alcohol solution and proceed to clean both air paths that hold the metal air path tubes. Rise the cleaning brush with water and repeat cleaning the airpaths.
• The clean the mouthpiece remove the metal mouthpiece and silicone splash guard insert, clean them both with mild soapy water and allow to air dry. Be sure to insert the silicone guard by following the track line within the RoK mouthpiece cavity.

• Periodically clean the connection to the atomizer on the base with a cotton swab dipped in alcohol, let dry before reattaching the atomizer.