Lookah Unicorn Mini Electric Dab Rig: Black

Lookah Unicorn Mini Electric Dab Rig

Introducing the Unicorn Mini, the newest edition to the Lookah Electric Dab Rig family. This Mini E-Rig is the little brother of the original Lookah Unicorn, the construction appears to be the same. However the Unicorn Mini features a more compact design that sits comfortably in your hand for one handed operation.

Like the original Unicorn the Mini utilizes a "quick-connect" magnetic connection to secure the pointed glass bubbler (where the Unicorn gets its name) in place. The quick-connect glass bubbler also adds to the connivence of loading your concentrates into the atomizer/coil connected to the base. Just snap it back on, and you're ready to rock!

Like the newer devices we've seen released by Lookah, the Unicorn Mini uses a 710 thread connection adapter, making the coils that come with the Swordfish, the Seahorse X, and the Unicorn Mini cross compatible. There are currently 3 different types of atomizer/coil options to choose from labeled as Type A, Type B, and Type C. All are made of crushed quartz but we hope to see a ceramic version soon. Heres a brief explanation of each:

• Type A Coil - Features a large round surface area for bigger dabs or for more evenly heated smaller dabs, and 360 air flow for large more thin clouds.
• Type B Coil - Features two small holes at the bottom to expose more heat for higher temperature dabs and quick heating times, resulting in milkier white clouds.
• Type C Coil - Features an airflow hole across the side for steady airflow and a smaller square surface area to get the most out of your concentrates, this atomizer is considered to be "wax saving".

The compact Mini is a standard one button device, 5 clicks to turn it on and off, 2 clicks to toggle through the three preset temperature settings, and it also features a preheat mode. The button contains a LED light to indicate each temperature setting, battery life, and more, creating a simple intuitive experience for beginners and connoisseurs alike.

The Unicorn Mini operates on a 950mAh battery that is charged through a USB-C charging port, it is said to last about 100 sessions from a single full charge, making it the most practical electric dab rig option for traveling. This Mini E-Rig contains a built in dab tool slot at the bottom of the base, to keep your dabbing accessories in one place. As well as one air path located next to it, which is easily accessible for cleaning with the included cleaning brush paired with cleaning solution. We love to see an OG, revamped to a more compact version and we surely believe Lookah delivered a keeper.

Specifications:

• Battery: 950mAh
• 710 Thread Connection
• Type-C Charging
• Three Preset Temperature Settings
• 100 Sessions Per Charge 

Features:

• Compact Mini Electric Dab Rig Design
• Revolutionary Magnetic "Quick-Connect" Glass Attachment
• 60 Second Sesh-Mode
• Multiple Quartz Coil Options for Optimal Flavor and Preference 
• Dab Tool Storage Slot Located at the Base
• Travel Friendly

Includes:

• 1 x Mini Unicorn Base
• 1 x Magnetic Glass Attachment 
• 2 x Lookah 710 Quartz Coils
• 1 x Dab Tool
• 1 x USB-C Charging Cable
• 1 x Cleaning Brush
• 1 x User Manual

Quick Tip:

Note : Please clean the device with the brush provided between uses to ensure unrestricted airflow for the best experience. 

5 Best Electric Dab Rigs of 2021

While plenty of dabbers still preefer their analog setups, there’s no denying that the e-rig has become more and more of a must-have in recent years, providing unparalleled convenience and exceptional consistency to the dab enthusiast. For those who don’t know, an E-Rig is a battery powered Electronic Dab Rig used in place of the classic Dab Torch, Quartz Banger, or Rig setup. Differing from a Desktop E-nail an Erig does not need to be plugged into a power source, nor attached to a rig to be used. It’s simply an all-in-one battery powered device, with water bubbler filtration, a coil, and a base battery pack power device which can be charged and taken with you to be used anywhere you go.

Click Here to Read More About the 5 Best Electric Dab Rigs of 2021!

Flashing Red Light

The red flashing light indicates low power / low battery.

Please try the following steps:

• 1. Please charge the device for about 2 hours, the LED indicator light sholuld illuminate red when charging.
• 2. Press the power button 5 times to turn the device off while charging.
• 3. After charging, click the button 5 times fast to turn on the device.

Flashing Puple Light

The purple flashing light indicates high-temperature protection. Please allow the device to cool down before attempting to use it again.

Flashing Yellow Light - 5 Times

If the indicator light flashes yellow 5 times when you press the power button then this may indicate an open circuit problem. Sometimes this can happen if the coil / atomizer isn't screwed on correctly or if it is screwed on too tight.

Please try the following steps:

• 1. Unscrew (anticlockwise) and take off the coil, use a Q-tip and some alcohol cleaner to clean any dirt or residue on the 710 thread end of the coil and the 710 thread hole of the unicorn mini.
• 2. Replace the coil by screwing it (clockwise) into the threaded hole.
• 3. Turn on the device and test it to see if this resolves the issue.
• 4. If the indicator light still flashes yellow, please try another new coil.

Flashing Yellow Light - 8 Times

If the indicator light flashes yellow 8 times when you press the power button then this may indicate an open circuit problem.

Please try the following steps:

• 1. Unscrew (anticlockwise) and take off the coil, use a Q-tip and some alcohol cleaner to clean any dirt or residue on the 710 thread end of the coil and the 710 thread hole of the unicorn mini.
• 2. Replace the coil by screwing it (clockwise) into the threaded hole.
• 3. Turn on the device and test it to see if this resolves the issue.
• 4. If the indicator light still flashes yellow, please try another new coil.

Where Can I Get Replacement Unicorn Mini Accessories?

You can purchase accessories for the Unicorn Mini by clicking here: www.e-nail.com. We have all three types of replacement coils.

I Am Having A Problem With My Coil

The coil is a consumable good and will wear out over time, depending on how often it is used.

• To ensure the tips last as long as possible, make sure you fully burn all the concentrates off the coil after each dab.
• If you leave concentrates on the coil or inside the airways it will harden and possibly ruin or wear out the coil prematurely.
• Please do not insert the cleaning brush into the airways of the coil as this can damage it.
• If your coil is worn out, please replace it with a new one.

How Do I Remove The Unicorn Mini Glass?

Removal Steps:

• 1. Remove the glass top, similar to when you are loading the device.
• 2. Unscrew the magnetic botton base from the glass top.

If your device is still not working correctly, please send an email to info@e-nail.com, stating the specific problem. Please include a picture or video showing the fault and also include your order number.