Lookah Seahorse X Orange 3 in 1: E-Nectar Collector, Wax Pen, and Portable E-Nail

Lookah Seahorse X Orange 3 in 1: E-Nectar Collector, Wax Pen, and Portable E-Nail

The Seahorse X wax pen is the most versatile device Lookah has ever created. This multifunctional device is an Enail, an E-Nectar Collector, a Wax Pen, and Cartridge Battery all in one. It even offers water filtration options for smoother hits!

This revolutionary design is the first in combining features of an electric nectar collector with an enail, all packaged in one superbly sleek design. To give the user better control of your cloud size, the Seahorse X has a built-in airway valve that can be used as a carb cap on any of the formats.

How To Use the Seahorse X Vape Pen

• A standard 5 button click turns the Seahorse X on.
• Once the device is powered on, you can select one of the three temperature settings, which adjust the voltage from low, 3.2V, Medium, 3.6V, or High 4.1V.
• With the temperature set, you can choose from Manual Mode or Sesh Mode.
• Manual Mode allows up to 20 seconds of heating (Pressing the Button).
• Sesh Mode allows for a 15 second preheat with a continuous heating for 30 seconds for multiple hits.

The Wax Pen Setup

This kit includes two atomizer cups that screw directly into the coil deck. The included glass mouthpiece or water bubbler can easily slide over the atomizer cup allowing the device to be used as a wax pen. The Seahorse X Wax Pen set up is also compatible with other water bubblers on the market. Most should work with this set up by using one of the two threaded attachments.

The E-Nectar Collector Setup

With a 510 thread adapter, the Seahorse X can be used as a e-nectar collector connecting any of the three types of Seahorse coils of your choice: quartz tip, ceramic tip, or the new ceramic tube.

When used as a honey straw, the glass mouthpiece or water bubbler fits directly onto the lower end of the device. You can also directly attach the mouthpiece end to a water pipe or use the included silicone hose and 14-18mm adapters.

It comes with an all-new Lookah Seahorse type III coil. This new tip is an electrically heated nectar collecting tube made from two layers of ceramic covering the coil. As the coil heats up, the tube will vaporize concentrates, turning them into vapor without leaving you with a burnt taste.

The Enail Setup

In the enail setup, you can connect the Seahorse X directly to your water pipe. Just use the included 14mm joint connector or attach the included Silicone Hose and adapter to fit 14/18mm female joint pipes. If you're using the nectar collector layout, then the Hose fits onto the lower end of the device with the joint connector or through the glass mouthpiece.

Kit comes with

• 1 Seahorse X
• 1 Tip/Coil Cover
• 1 Seahorse Tube Tip
• 1 Seahorse Quartz Tip
• 2 Wax cup
• 1 Glass Mouthpiece
• 1 Glass Bubbler
• 2 Stands/Bases
• 1 Joint Connector
• 1 510 Thread Adapter
• 1 Dab Tool
• 1 Silicone Hose
• 1 14/18mm Hose Adapter
• 1 User Manual
• 1 Cleaning Brush
• 1 USB Cable

Compatible With :

• Lookah Seahorse Dual Ceramic Coil
• Lookah Seahorse Replacement Coil 1.2 Ohm Quartz Coil
• Lookah Seahorse Coil III - Ceramic Tube 510 Thread Coil
• Lookah Quartz-Taste Wax Tank One Cart + Four Different Coils
• Lookah Seahorse Pro Green Short Hose 12 Inches 14mm 18mm Adapter
• Lookah Seahorse Protective Travel Leather Zipper Case
• 14mm and 18mm Water Pipes (must have adapters)

What is a Portable Enail?

A portable enail is a concentrate vaporization device that can be attached directly to a water pipe for added water filtration. Portable enails come in a variety of styles, up until recently portable enails did not have a digital display on them, had traditional conduction heating like a coil or a bucket and have now graduated to induction heating methods.

Advantages to Portable E-nails

A portable e-nail offers a more efficient, powerful, and smoother experience when combined with water filtration. Digital portable enails allow the user to customize their experience per their strength preference or concentrate’s vaporization point. There is a slight variation of vaporization points for each type of concentrate, utilizing a digital display will allow for accounting of this slight difference for the most controlled experience and cloud size control.

Quick Tip:​

Maintaining a Nectar Collector

Once you’ve gotten the hang of operating a nectar collector, whether it be electric or manual, you’ll need to maintain it. Ultimately, cleaning it after each use will keep the actual cleaning process simple, fast, and efficient, but if you can’t do that, try to clean it after each third or fourth use.

Cleaning an e-nectar collector is rather straightforward via two methods:

• Over-saturating the coil will decrease the coils vaporization rate (decreasing the cloud size). It is always recommended to slightly touch the edge of the concentrates with the coil tip, never dipping it into concentrate.
• Ideally after each session you may want to run a cleaning cycle, this will prevent gunking of your coil while increasing the lifespan and taste. A cleaning cycle (a frequent clean method) is done by running your device to its max temperature until there is no vapor rising from the coil, meaning there are no excess concentrate remaining on it or in it.
• To clean your e-nectar collector, soak a long cotton swab in our Formula 710 Cleaning Solution or any other cleaning solution then clean the airway of your device to remove any remaining reclaim.

Proper Storage of your nectar collector will elongate your products lifespan. Some coils and devices are more fragile than others, keeping your device in a safe case is recommended. So, find a safe spot to store your nectar collector where it will not risk breaking.

Read more about The Best E-Nectar Collectors of 2022 by Clicking Here!