Huni Badger
Huni Badger: Mini Badger Black - Electric Nectar Collector
- SKU:
- E-HB-MINBDGR-ENC-BLK
- Minimum Purchase:
- 1 unit
Description
Huni Badger: Mini Badger Black - Mini Electric Nectar Collector
AHHH! Finally, all the bark of the Original Huni Badger Electric Nectar Collector without all the bulk?
Check out the all new Mini Badger Electric Nectar Collector. It sports the same boxy looking yet economical design similar to its big brother but in a more bite sized package, matching the experience while being considerably more discreet!
The Mini Badger unfortunately does not have non-integrated batteries, instead it has a built-in 650mAh battery that is charged through a Micro USB port. Nonetheless, it is sure to last you tons and tons of sessions in between charges since its temperature range is much lower than the original Huni Badger. The lower temps of the Mini Badger makes this device "oops proof", reducing the chance of accidentally burning your concentrates instead of vaporizing them. It also helps to preserve terpenes and flavor to get the absolute full effect of all of your concentrates! This device operates on three different temperature settings, low, medium, and high and only has a manual mode.
As previously seen on the Huni Badger, the tips compatible with the Mini Badger are also ceramic tube tips with a 510 thread connection to be screwed onto the one end of the device. These Ceramic Tips, called Mini Tips, heat up super fast but they also provide the finest full flavored rips from your concentrates. The Mini Badger features a patented straight air flow design adding to the delectable experience from this device!
The Mini Badger has a threaded mouthpiece to make it compatible with Huni Badgers Nectar Collector bubblers if water filtration is more your thing, and a magnetic tip cap to keep your tip clean!
Specifications:
- Battery: 650mAh
- Charge Type: Micro USB
- Temperature Settings: 3 Different Temperature Settings
- Manual Operation ONLY
- Ceramic Tube Tip Coil
Features:
- Same Huni Badger Experience in a More Portable Discreet Package
- Ceramic Tube Tip for Maximum Flavors
- Magnetic Tip Cap to Keep Tip Clean
- Patented Air Flow Design
- Threaded Mouthpiece - Compatible with Huni Badger Glass Nectar Collector Bubblers
Includes:
- 1 x Huni Badger: Mini Badger Black - Electric Nectar Collector
- 1 x Huni Badger Mini Tip - Ceramic Tube Tip
Quick Tip
Maintaining a Nectar Collector
Once you’ve gotten the hang of operating a nectar collector, whether it be electric or manual, you’ll need to maintain it. Ultimately, cleaning it after each use will keep the actual cleaning process simple, fast, and efficient, but if you can’t do that, try to clean it after each third or fourth use.
Cleaning a nectar collector is rather straightforward via two methods:
- Over-saturating the coil will decrease the coils vaporization rate (decreasing the cloud size). It is always recommended to slightly touch the edge of the concentrates with the coil tip, never dipping it into concentrate. Doing a cleaning cycle, will prevent gunking of your coil while increasing the lifespan and taste.
- Ideally after every use, by the end of the second cycle (a frequent clean method) no vapor should be rising from the coil, meaning there are no excess concentrates remaining. This can be done by waiting for optimal heating temp of the device to consume the appropriate amount based on the coils vaporization rate then running a second cycle after with little to no additional concentrates touching the coil.
- To clean your e-nectar collector, soak a long cotton swab in our Formula 710 Cleaning Solution then clean the airway of your device to remove any remaining reclaim.
Proper Storage of your nectar collector will elongate your products lifespan. Some coils and devices are more fragile than others, keeping your device in a safe case is recommended. So, find a safe spot to store your nectar collector where it will not risk breaking.
Read more about The Best E-Nectar Collectors of 2021 by Clicking Here!
Warranty Information
How Do I Use My Mini Badger Electric Nectar Collector?
- 1. Remove the Tip Cap from the Mini Badger and make sure the MiniTip is properly installed.
- 2. Click the button five times (5x) to power the device ON, the LED light will flash three times (3x) to indicate that the device is powered ON.
- 3. After the device is powered ON, the LED light will illuminate to display the current battery level for one second (1 second) before entering Standby Mode.
- Green: Full Charge
- Yellow: Medium
- Red: Charge Soon
- 4. While in Standby Mode, click the button three times (3 times) to cycle through the different power settings. The power setting will remain the same until changed.
- Green: Low
- Yellow: Medium
- Red: High
- 5. After youve selected your desired power setting/temperature setting, hold the button down to start a heating cycle.
- 6. For best results, if your MiniTip/coil is cold to the touch, hold down the button to preheat the MiniTip for 8-10 seconds, release, then hold the button down again to start usage.
- 7. Slowly edge the MiniTip while hot into your concentrates for the best results.
I Am Having A Problem With My Coil
The coil is a consumable good and will wear out over time, depending on how often it is used.
- To ensure the tips last as long as possible, make sure you fully burn all the concentrates off the tip after each dab.
- If you leave concentrates on the tip or inside the airways it will harden and possibly ruin or wear out the coil prematurely.
- Please do not insert the cleaning brush into the airway of the coil as this can damage it.
- If your coil is worn out or broken, please replace it with a new one.
Why Is My Mini Badger Blinking?
If the indicator light is flashing when pressing the power button this indicates an overload problem.
- 1. Unscrew (anticlockwise) and take off the coil, use a cotton swab and some alcohol cleaner to clean any dirt or residue on the 510 thread end of the coil and the 510 thread hole of the Mini Badger.
- 2. If this screw is not securely in place, the device will register a circuit error when the power button is pressed. Please ensure this screw is tight, and secure after cleaning.
- 3. Replace the coil by screwing it (clockwise) into the threaded hole.
- 4. Turn the device on and test to see if this resolves the issue.
WARNING
Use EXTREME CAUTION.
- Never touch or change the MiniTip before it has cooled down.
If your device is still not working correctly, please send an email to info@e-nail.com, stating the specific problem. Please include a picture or video showing the fault and also include your order number.
