VapeBrat Tres Enail - Terp Slurper Enail Titanium Nail and Quartz E-banger Bucket Kit

VapeBrat Tres Enail Kit: Terp Slurper Enail, Titanium Nail Enail, Quartz Banger Enail

The VapeBrat Tres Enail utilizes a Terp Slurper E-Banger, Titanium Nail, and a Dual Size Bucket Enail Banger and fits any sized rig, male or female, 10mm, 14mm, 18mm. It's the last enail you will ever need to buy!

The VapeBrat Tres Enail Kit features a Micro Enail Controller Box.

Micro Enail Controller Box:

• The VapeBrat Micro Enail Controller Box is able to achieve super high temps in a matter of 2 minutes or less. The Micro features a customized PID for more accurate temperature readings with a slight fluctuation of about 0.2%. Temperature can be set anywhere from 0-999 Degrees based on preference, even though you can run this thing to almost 1000 degrees, its probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and not the actual temperature of the coil or heated surface, but with the help of the Octave or Terpometer, for added accuracy, you can achieve that perfect dab every time.

The VapeBrat Tres Kit also comes with a Terp Slurper E-Banger, Titanium Nail, and a Dual Size Bucket Enail Banger.

Terp Slurper Enail Banger with Marble Set:

• The Terp Slurper Enail Banger allows for the same mesmerizing, terp liberating functions of a regular terp slurper, however this banger has an extended quartz rod sticking out from the bottom "terp dish" to secure your enail coil in place by either a cotter pin or a 6mm o-clamp, reducing the risk of the coil falling off and potentially burning you or anything under it. The Terp Slurper Enail Banger also features a beveled top to create a tight seal for a marble carb cap, When a terp slurper is paired with a marble set, the bottom terp pill helps to diffuse the airflow and move around your concentrates so that all materials evaporate inside the heated chamber, the middle marble is used to keep the terp pill from flying out. Lastly the largest marble is used as a carb cap, capping the airflow so that all the air is directed from the slits at the bottom of your terp slurper, drawing your wax into the heated bottom chamber. For ultimate flavor and to get the most out of your terpenes its best to dab at relatively low temperatures. This enail banger is fully welded for increased durability making it less likely to break where the two pieces of quartz are normally joined together.

Note: This Terp Slurper E-Nail Banger can be used with either a flat coil or a 30mm coil.

Universal Titanium Nail:

• This nifty Titanium Nail gets its name from its universal joint and gender fitting. The top diameter on this guy is 20mm and it fits any standard 20mm barrel enail coil. This titanium nail is ideal to be used with a desktop enail because it features an elongated top portion just below the dish to fit the size of a barrel coil and hold it in place! The Universal 20mm Titanium Nail also features a flat top and a 4mm dish depth for those extra large dabs. Just pair this versatile piece with a titanium nail carb cap with a dab tool and you're golden!

Bucket Enail Banger:

• This bucket banger gets its name from its joint, the top larger portion of the joint fits 18mm Female rigs and the lower, smaller joint fits 14mm Female rigs. The bucket diameter on this guy is 20mm and it fits any standard axial or barrel 20mm coils. This banger is considered an E-Nail Banger because it features a quartz arm extending from the neck which is used as a holder for your enail coil! The Dual Size Enail Banger also features a flat top and an extra thick 2mm bottom for optimal heat retention. Just pair this with a couple of terp pearls and a dual nozzle carb cap and youre good to go!

Lastly the Tres Enail Kit comes with a 30mm Terp Slurper Enail Coil and a 20mm Barrel Coil.

30mm Terp Slurper Enail Coil:

• The 30mm Terp Slurper Enail Coil is paired up with the VapeBrat Terp Slurper Enail Banger for optimal heat transfer to the terp slurper "dish". This coil design covers the entire bottom and sides of the dish to minimize pooling and waste.

20mm Barrel Coil:

• The 20mm Barrel Coil is paired up with the Universal Titanium Nail and the Quartz Bucket Enail Banger, it fits perfectly on both for optimal heat transfer.

Both the Axial Coil and Barrel Coil are made of Stainless Steel and a kevlar sheath.

Specifications:

Micro PID Controller Box:

• Temperature Range: 0 Degrees F to 999 Degrees F
• Size: 5" x 3.5" x 1.5"
• Display: Flat Digital - Set Value
• Coil Connection: 5PIN Female XLR
• Temperature Precision: 0.2% FS
• Pin Set Up: PIN 1: TC+, PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC
• 1 Year Warranty on Controller Box

NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.

Terp Slurper Enail Banger:​

• Joint Size: 14mm
• Joint Angle: 90 Degree
• Joint Gender: Male
• Banger Bucket Diameter: 22mm
• Banger Bottom Diameter: 30mm
• Neck Connection: Fully Welded
• Top Style: Beveled

Note: You can change the Gender and Angle to fit your dab rig by choosing a different selection from the options menu on the right of the product page.

Marble Set:​

• Large Carb Cap Marble: 23mm Diameter
• Middle Smaller Marble: 15mm Diameter
• Terp Pill: 5mm Diameter

30mm Terp Slurper Enail Coil:​

• Size: 30mm - Compatible with 30mm Diameter Bangers
• Coil Style: Hybrid
• Coil Material: Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type
• 30 Day Warranty on Enail Coil

Universal Titanium Nail:

• Joint Size: 10mm 14mm 18mm
• Joint Gender: Male Female
• Joint Angle: Straight - Compatible with 90 Degree Joint Rigs
• Nail Diameter: 20mm
• Nail Depth: 4mm

Dual Size Enail Banger:

• Joint Size: 14mm and 18mm
• Joint Angle: 90 Degrees
• Joint Gender: Male
• Banger Bucket Diameter: 16mm
• Banger Bottom Diameter: 20mm
• Bottom Thickness: 2mm
• Neck Connection: Regular Weld
• Top Style: Flat Top

20mm Barrel Enail Coil:​

• Size: 20mm - Compatible with 20mm Diameter Bangers & Nails
• Coil Style: Barrel
• Coil Material: Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type
• 30 Day Warranty on Enail Coil

Features:​

• Controller Box Low Energy Usage
• Can be Used with 250V 6 Amp Fuse - Fuse Protection
• Steady Temperature Control With Almost No Overshoot
• Controller Box Contains a PID Microprocessor
• Quick Heat Up
• ON/OFF Push Button for Box
• Terp Slurper with Marble Set Combination for More Evenly Heated Dabs
• 30mm Hybrid Coil Style for Top Notch Heat Distribution
• Titanium Nail Universal Size and Gender
  • Can be Used with Male and Female Joint Rigs
  • Can be Used with 10mm, 14mm, and 18mm Joint Size Rigs
• Quartz Bucket with Flat Top with a Thick 2mm Bottom
  • Dual Size to Fit 14mm and 18mm Rigs
  • Extended Quartz Arm to Hold Enail Coil

Includes:

• 1 x VapeBrat Micro Enail Controller with Digital Display
• 1 x VapeBrat Full Welded Enail Banger 14mm and 18mm Male 90 Degree Bucket Banger
• 1 x VapeBrat Fully Welded Terp Slurper 14mm Male 90 Degree Angle
• 1 x Marble Pill 3 Piece Set
• 1 x VapeBrat Universal Titanium Nail (Fits 10mm/14mm/18mm Male and Female)
• 1 x 14mm to 18mm Female to Male Adapter
• 1 x Glass Angled Carb Cap
• 1 x Titanium Dab Tool Carb Cap
• 1 x 30mm Terp Slurper Enail Coil
• 1 x 20mm Barrel Coil
• 1 x 6ft Long Power Cord
• 2 x Silicone Jars
• Travel Case Sold Separately
• Instruction & Troubleshooting Manual
• BONG NOT INCLUDED

Quick Tip:

How to Dab with and Use an E-Nail?

• Plug in all of the parts, connect the nail/banger and rig
• The controller box can now be turned on, most enail controller boxes will have a switch or a button to turn it on and off. (If you see an error code on the display screen after the controller box is turned on and the COIL IS CONNECTED PROPERLY, this may indicate that there is a problem with the coil's thermocouple. This does NOT mean the unit is faulty.)
• Set the controller box to your desired temperature.(We recommend running your enail controller between 450 and 650 degrees Fahrenheit, running an enail controller higher or lower will result in a less than satisfactory experience while running the risk of damaging the banger.)
• Once the banger/nail is to your desired temperature (usually takes about 30 seconds to heat), pick up the desired amount of concentrates with the tip of a dab tool.
• Place the concentrates on the bottom of the heated surface with the dab tool. (Utilizing the appropriate amount of concentrates based on the size and temperature of the banger or nail, will maximize the cloud size)
• Inhale through the dab rig mouthpiece.

Read a Detailed Explanation of How to Setup and Use an Enail

Enail FAQ Beginners Guide