VapeBrat LCD Enail Controller and Power Cord

VapeBrat LCD Enail Controller and Power Cord

The VapeBrat LCD Enail Controller Box is able to achieve super high temps in a matter of seconds. The VapeBrat LCD features a customized PID for more accurate temperature readings with a less temperature fluctuation than the VapeBrat Micro. Temperature can be set anywhere from 0-1000 Degrees based on preference, even though you can run this thing to almost 1000 degrees, it's probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and the actual temperature of the coil or heated surface, giving the user that added accuracy needed to achieve that perfect dab every time. Just set this enail to your desired temp and dab on my fellow VapeBrat... dab on!

The new VapeBrat LCD Controller

LCD PID Controller Box:

• Temperature Range: 0 F to 1000 F
• Size: 4.7" x 3" x 1.6"
• Display: LCD Digital - Set Value and Coil Temp - Touch Screen
• Input: 110V - 250V
• Coil Connection: 5PIN Female XLR
• Pin Set Up: PIN 1: TC+, PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC

NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.

Features:

• Controller Box Low Energy Usage
• Can be Used with 250V 6 Amp Fuse - Fuse Protection
• Steady Temperature Control With No Overshoot
• Controller Box Contains a PID Microprocessor
• Quick Heat Up
• ON/OFF Touch Button for Box

Includes:

• 1 x VapeBrat LCD Enail Controller Box with LCD Display
• 1 x 6ft Long Power Cord