Pulsar Elite Series Mini eNail Kit w/ 6-in-1 Nail

Pulsar Elite Series - Mini E-Nail with Universal Nail

The Pulsar Elite Series - Mini eNail w/ 6-in-1 Nail provides simple push-button operation, exact temperature control, and comes with a compatible Universal 10/14/19mm Ti Nail. This portable powerhouse kit features a digital control box with removable, locking 5ft power cord; a temperature range from 0-1200 F; a 20mm compatible heating coil with 4ft cord; and a grade 2 Titanium carb cap with dabber handle.

Highlights:

• 150w portable enail (0-1200 degrees F)
• 20mm heating coil
• Universal 10/14/19mm Ti nail (included)
• Digital display and push button operation
• Removable, locking 5ft power cord

Specifications/Features:

• Max Temp: 0 - 1200 Degrees Fahrenheit
• Plug Type: 120V USA
• Power Cable Length: 5ft
• Coil Cable Length: 4ft
• Controller Dimensions:
• Box Material: Metal
• Pin Setup: Pin 1 = AC, Pin 2 = AC, Pin 3 = TC+, Pin 4 = TC-, Pin 5 = Ground

Includes:

• 10mm, 14mm, and 18mm Titanium Nail - Male & Female Universal ​
• 20mm Heater Coil
• Temperature Controller
• Power Cord
• Dab Tool Carb Cap Dual Use Tool

Compatible with:

• Pipes: Universal Joint and Joint Size Make this Enail kit compatible with all Water Pipes

Quick Tip

Desktop and Portable Options Available

Enails come in two categories: desktop and portable. Desktop enails may be battery-powered or plug into an outlet, and they are larger in size, usually having a wider array of output capabilities. Meanwhile, portable enails have lower battery capacities, but the tradeoff is that you can take them with you easily wherever you go.

Offer Precise Temperature Control

Yes, temperature is the most crucial component of dabbing. The temperature that your dabs reach determines the potency, amount of flavor and vapor that you experience, as each compound in your concentrate has a specific boiling point at which its properties are activated. A huge benefit of using an enail is that you can set the exact temperature that you prefer and know that each and every puff of vapor will therefore be identical to the last.

Different E-Nail Coil Sizes and What they Do?

The e-nail coil size determines the size of the banger or nail that will be able to be used with it.

Consequently, the diameter of the banger will impact the surface area available for vaporizing. Impacting the amount of concentrate able to be efficiently used at a time. For example, if using a 16mm banger with a 16mm enail coil at 450 degrees temp vs. using a 35mm banger with a 35mm enail coil at 450 degrees temp. You can put two - three times more concentrate in a 35mm than you would a 16mm while keeping the same vaporization rate and minimal pooling.

The coil size and heat-able surface area of the banger or nail will determine the vaporization rate and amount of concentrates you can vaporize at one time.

Difference in Joint Sizes 10/14/18mm

There are a few specifications you can garner from a pipes joint size.

• 10mm- Typically, when you are using a 10mm joint you will be working with a smaller pipe with less water filtration and airflow. These are predominately used for concentrates to enable smaller smoother inhales.
• 14mm- The 14mm joint sizes are the most common, they are typically found in a range of heights and percolator set ups, while offering more water filtration options than smaller 10mm pipes.
• 18mm-19mm- This joint size (18mm) is traditionally reserved for those with "lifeguard lungs", who can consume larger inhales, the pipes are typically much larger in size sometimes up to 6 ft. while offering the most water filtration.

To put it simply it's the straw concept. Think of using any coffee straw verses using a large milkshake straw, soda straw. With one you can inhale a large amount the other would be more constricted. Some people would prefer the more constraint straw e.g. the "coffee straw" (10mm).

Read a More Detailed Explanation of How to Setup and Use an Enail

Enail FAQ Beginners Guide - Click Here