Ooze Pronto: Rainbow - Electric Nectar Collector

Ooze Pronto: Rainbow - Electric Nectar Collector

Dabbing on the go anywhere, anytime, pronto.

If an Ooze battery is your everyday go to, this is definitely the device upgrade for you! The Ooze Pronto is an electric nectar collector style device with a simple one button design. The Ooze Pronto sports a similar operation to the Ooze batteries, 5 button clicks to turn on, 3 button clicks to change the temp, and a single click and hold to fire.

The Ooze Pronto sports a super sleek sophisticated body with a geometric like pattern, a glass tube, and a ceramic coil. The glass tube, as previously seen on the seahorse pro, provides a clear and removable vapor path on this device. It is super easy to detach and clean, providing flavorful rips with each session. The vapor tip (or coil) that comes with this kit is similar to the coils seen on the little dipper by dip devices, although it looks intimidating, this coil provides super clean flavors and a slow rise in heat!

The Pronto electric nectar collector features 3 different temperature settings, the user can adjust the device's temperature based on the consistency of concentrates being used. This device comes equipped with a monster sized 925mAh battery, charged through a USB-C charging port sure to last you plenty of sessions!

Specifications:

• Battery: 925mAh
• Height: 7 Inches
• Charging Type: USB-C
• Charge Time: 45 Minutes
• Temperature Settings: 3 Temperature Settings
• Ceramic and NiChrome Coil

Features:​

• Portable, Pocket Sized, and Travel Friendly
• Sleek Sophisticated Design
• One Button Operation
• Multiple Coil Options - Ceramic & Quartz
• Glass Tube - Clean Vapor Path

Includes:

• 1 x Ooze Pronto Electric Nectar Collector
• 1 x Ooze Pronto Coil
• 1 x Coil Cap
• 1 x USB-C Charger
• 1 x User Manual

Quick Tip:​

Maintaining a Nectar Collector

Once you've gotten the hang of operating a nectar collector, whether it be electric or manual, you'll need to maintain it. Ultimately, cleaning it after each use will keep the actual cleaning process simple, fast, and efficient, but if you can't do that, try to clean it after each third or fourth use.

Cleaning an e-nectar collector is rather straightforward via two methods:

• Over-saturating the coil will decrease the coils vaporization rate (decreasing the cloud size). It is always recommended to slightly touch the edge of the concentrates with the coil tip, never dipping it into concentrate.
• Ideally after each session you may want to run a cleaning cycle, this will prevent gunking of your coil while increasing the lifespan and taste. A cleaning cycle (a frequent clean method) is done by running your device to its max temperature until there is no vapor rising from the coil, meaning there are no excess concentrates remaining on it or in it.
• To clean your e-nectar collector, soak a long cotton swab in our Formula 710 Cleaning Solution or any other cleaning solution then clean the airway of your device to remove any remaining reclaim.

Proper Storage of your nectar collector will elongate your products lifespan. Some coils and devices are more fragile than others, keeping your device in a safe case is recommended. So, find a safe spot to store your nectar collector where it will not risk breaking.

Read more about The Best E-Nectar Collectors of 2022 by Clicking Here!

Ooze Pronto FAQ

How Do I Use the Ooze Pronto?

• 1. Remove Tip Cap and screw on the Ooze Pronto Electric Nectar Collector Coil so that it is secure onto the device.
• 2. Click the fire button 5 times (5x) to power the Ooze Pronto ON.
• 3. One the device is powered ON, click the fire button 3 times (3x) to select your desired temperature setting.
  • Green: Low
  • Yellow: Medium
  • Red: High
• 4. After selecting your desired temperature setting, you can then hold down the fire button to heat the coil tip.
• 5. Insert the tip directly into your jar of concentrates and inhale through the glass mouthpiece.

Why is My Ooze Pronto Not Heating Up?

• Please remove the coil from the Pronto and check to see if the connection point between the coil and the device is clean. If there is residue, please use a cotton swab dipped in isopropyl alcohol to clean both connection points. Allow for all parts to dry fully before reassembling.
• If you are still experiencing this issue, please replace the coil to see if this resolves it.

If you are experiencing any issues with this device or have any additional questions, please send an email to info@e-nail.com, stating the specific problem. Please include a picture or video showing the fault and also include your order number.