25mm Enail Coil Kit: Quartz Enail Deep Dish Banger - VapeBrat

25mm Enail Coil Kit: Quartz Enail Deep Dish Banger - VapeBrat

Take a look at the newest enail coil kit made exclusively for your favorite VapeBrat Enail! The 25mm deep dish coil, often referred to as a Cobra coil by different manufacturers, is an 8 wrap enail coil designed with an increased coil depth to accommodate an extra-deep banger.

You might be curious about the differences between this enail coil kit and a typical 25mm axial enail coil kit! That's a great question! As mentioned earlier, the enail coil included with this kit has a greater depth, making it suitable for deep bucket bangers. If you're considering using a longer bottom bucket banger, there are two great reasons to do so: it helps reduce reclaim and improves heat retention!

The bottom of the banger sits quite low into the coil, allowing the coil to cover a significant portion of the banger exterior walls. This setup provides you with a more substantial heated surface for your dabs. Also, the longer bucket bottom means your dabs have a greater distance to travel before they reach the neck of the banger. Which lessens the chance of extra reclaim from making its way into your dab rig.

This electronic coil kit is a fantastic choice for anyone! You can enjoy bigger dabs while keeping reclaim to a minimum! Over time, your dab rig will remain pristine and you'll be on the path to enjoying more velvety, stronger, completely vaporized dabs.

A deeper banger helps keep your heat locked in at the bottom for an extended period of time. It's the same idea as using an XL Atomizer, which you can find on both of the Puffco Peak and Focus V Carta. When you take the carb cap off your banger, cool air enters inside, which cools your banger down faster. In this situation, the longer bucket lets the heat remain in the lower section of your banger for a bit longer because there's not as much air traveling to that section!

Specifications:

• 25mm Bottom Diameter Banger - Deep Dish
• 25mm Enail Coil - Axial Style - 8 Wraps
• Compatible Spinner Dab Cap and Dab Pearls Includes
• Pin Setup / Controller Box Compatibility: Pin 1: TC-, Pin 2: TC+, Pin 3: Ground, Pin 4: AC, Pin 5: AC
• Can be used with all VapeBrat Controller Boxes

Features: 

• Enail Coil and Banger Full Kit
• Fully Vaporized Dabs with the Use of Dab Pearls and Spinner Carb Cap
• Customizable Kit to Fit Your Glass Dab Rig
• Secure Enail Coil Holder Clamp
• Deep Dish Coil and Banger for Better Heat Retention and Less Reclaim

Includes:

• 1 x 25mm Enail Coil - Axial 8 Wraps: VapeBrat
• 1 x 25mm Deep Dish Quartz Enail Banger
• 1 x Spinner Carb Cap
• 2 x Terp Pearls
• 1 x O-Clamp