VapeBrat Electric Nectar Collector Enail Upgrade Kit

VapeBrat Electric Nectar Collector Enail Upgrade Kit

10mm Barrel Coil, VapeBrat X2 Nectar Collector with 14mm Titanium Nail. Turn your ordinary Enail into an Nectar Collector Enail with this upgrade kit!

If you are purchasing this item for a different brand controller box that is not VapeBrat, please check the item specifications below to ensure that your controller box is compatible with the enail coil that comes with this kit!

The VapeBrat Nectar Collector Enail Upgrade Kit includes theVapeBrat X2 Nectar Collector, a Titanium Nail, and a 10mm Barrel Enail Coil which fits any Nectar Collector Nail with a 10mm Tip!

The VapeBrat Enail Nectar Collector Upgrade Kit comes with a VapeBrat X2 Nectar Collector:

VapeBrat X2 Nectar Collector:

• The VapeBrat X2 Nectar Collector Water Bubbler is a premier hand blown borosilicate glass piece, designed to be completely spill proof. The VapeBrat X2 houses a dome percolator, it contains multiple holes at the bottom which pull your vapors into the filtration chamber as you inhale. The construction of the VapeBrat X2 Glass Bubbler allows for maximum diffusion and filtering of your dabs, which in turn delivers the purest, full flavored, smoothest hits. The VapeBrat X2 can be used with any 14mm Joint Nectar Collector Nail, the holes at the bottom of the percolator should be about one centimeter beneath the water level for optimal performance.

14mm Titanium Nail:

• The Titanium Nail featured on the VapeBrat X2 has a 14mm Male joint connection to fit any standard 14mm Female Nectar Collector Bubbler. Titanium is ideal for high temperature dabs, it takes a bit longer to heat up than other materials. However, it retains heat longer than quartz would and cools off faster than ceramic. Titanium Nails can reach temperatures upwards of almost 1,500 degrees, (needless to say, you shouldn't run your enail to THAT high of a temperature in any circumstance) its ability to withstand super high temperatures shows how durable and reliable titanium really is.
• The Titanium Nail included in this kit has been updated to have a domed shaped bottom that screws into the 14mm Male body, the e-nail coil sits in between the dome and the joint. This is the most secure connection for an enail coil and a titanium nail! Never worry about the coil falling off potentially burning you or whatever is under it!

Lastly the VapeBrat Nectar Collector Enail Kit comes with a 10mm Barrel Coil.

10mm Barrel Coil:

• The 10mm Barrel Enail Coil is paired up with the VapeBrat X2 Nectar Collector for optimal heat transfer to the 14mm Titanium Nail. This coil design covers the entire nectar collecting tube for precision heating for your concentrates.

The Barrel Enail Coil is made out of Stainless Steel and a kevlar sheath.

The VapeBrat 10mm Barrel Coil wraps tightly around to fit any 10mm Tip Titanium, Ceramic, or Quartz Nail, creating a super powered electric nectar collector that is out of this world.

Check out our VapeBrat Electric Nectar Collector Enail, for an all inclusive deal including a nectar collector, the controller box, coil, nails, and keck clips.

Specifications:

10mm Barrel Enail Coil:​

• Size: 10mm - Compatible with 14mm Titanium Nails
• Coil Style: Barrel
• Coil Material: Nickel Chromium Stainless Steel
• Sheath: Kevlar
• Thermocouple: K Type
• Pin Set Up: PIN 1: TC+, PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC
• 30 Day Warranty on Enail Coil

NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.

14mm Titanium Nail:

• Joint Size: 14mm
• Joint Gender: Male
• Joint Angle: Straight - For Nectar Collectors
• Height: 3 Inches
• Material: Grade 2 Titanium
• Domed Bottom with a Screw Fit for a Secure Connection with the E-Nail Coil

VapeBrat X2 Nectar Collector:

• Joint Size: 14mm
• Joint Gender: Female - Compatible with 14mm Male Nails
• Height: 6 Inches When Assembled
• Percolator: Inline Perc

Features:​

• Upgrade Any Nectar Collector to An Enail Nectar Collector
• 10mm Barrel Coil Style for Top Notch Heat Distribution
• VapeBrat X2 Bubbler for Water Filtration
• Convert Your VapeBrat Enail Controller Box to An Electric Nectar Collector with this Kit

Includes:

• 1 x VapeBrat X2 Nectar Collector Bubbler
• 1 x 14mm Titanium Nail for Nectar Collector
• 1 x 10mm Barrel Enail Coil
• 1 x Keck Clip
• 1 x O-Clamp

Quick Tip:

How to Dab with and Use an E-Nail?

• Plug in all of the parts, connect the nail/banger and rig
• The controller box can now be turned on, most enail controller boxes will have a switch or a button to turn it on and off. (If you see an error code on the display screen after the controller box is turned on and the COIL IS CONNECTED PROPERLY, this may indicate that there is a problem with the coil’s thermocouple. This does NOT mean the unit is faulty.)
• Set the controller box to your desired temperature.(We recommend running your enail controller between 450 and 650 degrees Fahrenheit, running an enail controller higher or lower will result in a less than satisfactory experience while running the risk of damaging the banger.)
• Once the banger/nail is to your desired temperature (usually takes about 30 seconds to heat), pick up the desired amount of concentrates with the tip of a dab tool.
• Place the concentrates on the bottom of the heated surface with the dab tool. (Utilizing the appropriate amount of concentrates based on the size and temperature of the banger or nail, will maximize the cloud size)
• Inhale through the dab rig mouthpiece.

Enail FAQ Beginners Guide